****************************
****************************
Nissan-Datsun Truck Armada 2WD V8-5.6L (VK56DE) A L L Diagnostic Trouble Codes ( DTC ): B Code Charts Page 134
1. Turn ignition switch ON.
2. Check "Self diagnostic result" with CONSULT-III.
Is DTC detected?
YES - See: B2193/Without Intelligent Key System.
NO - Inspection End.
Diagnosis Procedure
1.REPLACE BCM
1. Replace BCM. See: Body and Frame/Body Control Systems/Body Control Module/Service and Repair.
2. Perform initialization with CONSULT-III.
For initialization, refer to "CONSULT-III Operation Manual".
Does the engine start?
YES - BCM was malfunctioning.
NO - ECM is malfunctioning.
- Replace ECM.
- Perform ECM re-communicating function.
B2194
B2194 ID DISCORD IMMU-I-KEY
Description
BCM performs the ID verification with Intelligent Key unit that allows the engine to start. BCM starts the communication with Intelligent Key
unit if ignition switch is turned ON and starts the engine if the ID is OK. BCM prevents the engine from starting if the ID is not registered.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Check "Self diagnostic result" with CONSULT-III.
Is DTC detected?
YES - See: B2194.
NO - Inspection End.
Diagnosis Procedure
1.PERFORM INITIALIZATION
1. Perform initialization with CONSULT-III. Re-register all mechanical keys.
For initialization and registration of mechanical key. Refer to "CONSULT-III Operation Manual".
2. Check "Self diagnostic result" with CONSULT-III.
Is DTC detected?
YES - GO TO 2
NO - ID was unregistered.
2.REPLACE BCM
1. Turn ignition switch OFF.
2. Replace BCM. See: Body and Frame/Body Control Systems/Body Control Module/Service and Repair.
3. Perform initialization with CONSULT-III. Re-register all mechanical keys.
For initialization and registration of mechanical key. Refer to "CONSULT-III Operation Manual".
Can the system be initialized and can the engine be started?
YES - BCM is malfunctioning.
NO - GO TO 3
3.CHECK INTERMITTENT INCIDENT
See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Intermittent Incident.
- Inspection End.
B2205
DTC B2205 VEHICLE SPEED CIRCUIT
Description
****************************
Nissan-Datsun Truck Armada 2WD V8-5.6L (VK56DE) A L L Diagnostic Trouble Codes ( DTC ): B Code Charts Page 134
1. Turn ignition switch ON.
2. Check "Self diagnostic result" with CONSULT-III.
Is DTC detected?
YES - See: B2193/Without Intelligent Key System.
NO - Inspection End.
Diagnosis Procedure
1.REPLACE BCM
1. Replace BCM. See: Body and Frame/Body Control Systems/Body Control Module/Service and Repair.
2. Perform initialization with CONSULT-III.
For initialization, refer to "CONSULT-III Operation Manual".
Does the engine start?
YES - BCM was malfunctioning.
NO - ECM is malfunctioning.
- Replace ECM.
- Perform ECM re-communicating function.
B2194
B2194 ID DISCORD IMMU-I-KEY
Description
BCM performs the ID verification with Intelligent Key unit that allows the engine to start. BCM starts the communication with Intelligent Key
unit if ignition switch is turned ON and starts the engine if the ID is OK. BCM prevents the engine from starting if the ID is not registered.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Check "Self diagnostic result" with CONSULT-III.
Is DTC detected?
YES - See: B2194.
NO - Inspection End.
Diagnosis Procedure
1.PERFORM INITIALIZATION
1. Perform initialization with CONSULT-III. Re-register all mechanical keys.
For initialization and registration of mechanical key. Refer to "CONSULT-III Operation Manual".
2. Check "Self diagnostic result" with CONSULT-III.
Is DTC detected?
YES - GO TO 2
NO - ID was unregistered.
2.REPLACE BCM
1. Turn ignition switch OFF.
2. Replace BCM. See: Body and Frame/Body Control Systems/Body Control Module/Service and Repair.
3. Perform initialization with CONSULT-III. Re-register all mechanical keys.
For initialization and registration of mechanical key. Refer to "CONSULT-III Operation Manual".
Can the system be initialized and can the engine be started?
YES - BCM is malfunctioning.
NO - GO TO 3
3.CHECK INTERMITTENT INCIDENT
See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Intermittent Incident.
- Inspection End.
B2205
DTC B2205 VEHICLE SPEED CIRCUIT
Description
