Monday, February 26, 2018

Nissan-Datsun Truck Armada 2WD V8-5.6L (VK56DE) A L L Diagnostic Trouble Codes ( DTC ): B Code Charts Page 129

****************************
****************************Nissan-Datsun Truck Armada 2WD V8-5.6L (VK56DE) A L L Diagnostic Trouble Codes ( DTC ): B Code Charts  Page 129
3 - Ground : Continuity should exist.
Is the inspection result normal?
YES - GO TO 5
NO - Repair or replace harness.
NOTE:
If harness is OK, replace BCM, See: Body and Frame/Body Control Systems/Body Control Module/Service and Repair. Perform initialization
with
CONSULT-III. For initialization, refer to "CONSULT-III
Operation Manual".
5.CHECK NATS ANTENNA AMP. SIGNAL LINE- 1
1. Connect NATS antenna amp. connector.
2. Turn ignition switch ON.
3. Check voltage between NATS antenna amp. connector M21 terminal 2 and ground with analog tester.
Is the inspection result normal?
YES - GO TO 6
NO - Repair or replace harness.
NOTE:
If harness is OK, replace BCM, See: Body and Frame/Body Control Systems/Body Control Module/Service and Repair. Perform initialization
with CONSULT-III. For initialization, refer to "CONSULT-III Operation Manual".
6.CHECK NATS ANTENNA AMP. SIGNAL LINE- 2