Skip to main content

Nissan-Datsun 370Z Technical 11-012B Date: 130215 Entertainment Systems - CD And DVD Player Concerns

 Nissan-Datsun 370Z Technical  11-012B Date: 130215
Entertainment Systems - CD And DVD Player Concerns
Classification:
EL11-004b
Reference:
NTB11-012b
Date:
February 15, 2013
CD & DVD PLAYER CONCERNS
This bulletin has been amended to include current vehicles. No other changes have been made.
Please discard all previous versions.
APPLIED VEHICLES:
All Nissan Vehicles with an Audio Compact Disc (CD) Player or Digital Video Disc (DVD) Player
SERVICE INFORMATION
If a CD/DVD Player incident is noted, a possible cause may be improper CD/DVD disc care, condition, or usage. This bulletin provides updated
CD/DVD Player operation instructions to avoid potential incidents/customer concerns caused by improper care and usage of CD/DVD discs.
  Page 343
To aid in solving customer concerns, use the following guidelines when speaking to customers or inspecting incident vehicles.
^ Customers must not use discs that are warped, scratched, chipped, cracked, have abnormal edges or are otherwise damaged (see Figures 1 and 2).
Damaged or poor condition discs may cause the Player internal mechanism to jam or have optical pick-up errors.
NOTE:
Do not make a Warranty claim against a Player that will not play damaged or poor condition discs as described in this Bulletin.
^ Instruct the customer to handle discs carefully when inserting/removing them from the Player. Hold them by the edges and do not bend them.
Always place them in the storage case when they are not being used (played). This will ensure that discs stay in top working order.
^ Customers must not use discs with adhesive labels. The label will loosen or peel and this can jam the Player.
^ Ensure that the customer only uses audio CDs that have the "Compact Disc Digital Audio" insignia on them (see Figure 3). The audio CD Player
was designed to use CDs that meet this design standard. Lower quality CDs may not function properly in the audio CD Player.
^ Inform the customer that this information and additional disc care and cleaning instructions may be found in all Nissan Owner's Manuals.
  Page 344
Disclaimer

Comments

Popular posts from this blog

C1140 C1140 ACTUATOR RLY

**************************** **************************** C1140 C1140 ACTUATOR RLY Description Activates or deactivates each solenoid valve according to the signals transmitted by the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1140. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Check terminal for deformation, disconnection, looseness, and so on. If any malfunction is found, repair or replace terminal. Nissan-Datsun Truck Armada 2WD V8-5.6L (VK56DE)  C CODE Page 49 4. Reconnect

C1144 C1143, C1144 STEERING ANGLE SENSOR

**************************** **************************** C1144 C1143, C1144 STEERING ANGLE SENSOR Description The steering angle sensor detects the rotation amount, angular velocity and direction of the steering wheel, and transmits the data to the ABS actuator and electric unit (control unit) via CAN communication. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1143. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Disconnect steering angle sensor connector. 4. Check terminal for deformation, disconnection, looseness, and so on.

C1142 C1142 PRESS SENSOR

**************************** **************************** C1142 C1142 PRESS SENSOR Description The front and rear pressure sensors convert the brake fluid pressure to an electric signal and transmit it to the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1142. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. FRONT PRESSURE SENSOR 1.CONNECTOR INSPECTION 1. Turn the ignition switch OFF. 2. Disconnect the front pressure sensor connector and ABS actuator and electric unit (control unit) connector and inspect the terminals for deformation, disconnection, looseness, or damage. Is the inspection result normal? YE