2009-2010 MAXIMA; DRIVER'S SEAT BOTTOM SHIFTS SLIGHTLY
TECHNICAL SERVICE BULLETIN
Reference Number(s): NTB09-092b, Date of Issue: June 16, 2010
Superceded Bulletin(s): NTB09-092A, Date of Issue: February 15, 2010
IF YOU CONFIRM
The driver's seat bottom very slightly "rocks" and/or "shifts" back and forth when
accelerating, braking, or when making a turn.
ACTION
Replace the driver seat frame (adjuster assembly) with a new one.
l During reassembly use new side and front seat finishers.
Fig. 1: Seat Frame (Adjuster Assembly)
PARTS INFORMATION
PARTS INFORMATION
NISSAN: 2009-2010 Maxima
CLASSIFICATION: BT09-039b
APPLIED VEHICLES: 2009-2010 Maxima (A35)
APPLIED VIN: 2009 vehicles - All; 2010 vehicles built before 1N4AA(****)AC 825954
APPLIED DATE: Vehicles built before December 2, 2009
NOTE: This bulletin has been amended. The Service Procedure and Parts
Information have been revised. Please discard previous versions of this
bulletin.
IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you
will be performing. You MUST closely follow the entire Service Procedure as
it contains information that is essential to successfully completing this
repair.
DESCRIPTION
COLOR /
CODE
P/N QTY
Frame Assy - Front Seat
Cushion (Seat Adjuster
Assy.)
N/A
Use the VIN and electronic parts
catalog (FAST or equivalent) to
determine the correct P/N
1
Side Finisher
Frost / K 87381-9N10A
1
Charcoal /
G
87381-9N10B
Tan
(Beige) / C
87381-9N10C
2009 Nissan Maxima S
2009-2010 MAXIMA; DRIVER'S SEAT BOTTOM SHIFTS SLIGHTLY
2020年3月30日 12:53:06 Page 1 © 2011 Mitchell Repair Information 11 Company, LLC.
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
CLAIMS INFORMATION
SERVICE PROCEDURE
1. Write down all radio station pre-sets.
Radio Station Pre-sets
2. If equipped - write down / record the following customer settings for the ATC
(Automatic Temperature Control) system (refer to the ESM as needed):
l Temperature Setting Trimmer
l Foot Position Setting Trimmer
l Inlet Port Memory Function
3. Turn the ignition switch OFF.
4. Disconnect both battery cables - negative cable first.
5. WARNING: Wait for at least 3 minutes before removing the driver seat:
6. Carefully remove the driver seat from the vehicle.
l Refer to section SE of the ESM for Seat Removal Information .
Front Finisher
Frost / K 87374-9N10A
Charcoal /
G
87374-9N00B
Tan
(Beige) / C
87374-9N00C
DESCRIPTION PFP OP CODE SYM DIA FRT
RPL Left Seat Cushion Frame Ass'y (1) VH32AA ZJ 46 (2)
(1) Refer to FAST or equivalent and use the Frame Assy.-Seat Cushion P/N as the
PFP.
(2) Refer to the current Nissan Warranty Flat Rate Manual and use the indicated
FRT.
IMPORTANT: Follow all cautions, warnings, and notes in the Electronic Service Manual
(ESM) when working on or near a Supplemental Restraint System (SRS),
such as an air bag.
Presets 1 2 3 4 5 6
A
B
C
SAT
2009 Nissan Maxima S
2009-2010 MAXIMA; DRIVER'S SEAT BOTTOM SHIFTS SLIGHTLY
2020年3月30日 12:53:06 Page 2 © 2011 Mitchell Repair Information Company, LLC.
7. Replace the seat frame / adjuster assembly.
l Refer to the ESM - SE Section, Front Seat Driver Side: Disassembly and
Assembly.
l During reassembly use a new side finisher and new front finisher listed in
the Parts Information.
Fig. 2: Seat Frame (Adjuster Assembly)
8. Connect the battery cables - positive cable first.
9. Reset the clock and the radio station presets.
10. Refer to the Service Manual for the following "reset / relearn" procedures:
l Power Window Initialization
l Sunroof Memory Reset/Initialization
l ATC Temperature Setting Trimmer (A/C system)
l ATC Foot Position Setting Trimmer (A/C system)
l ATC Inlet Port Memory Function - FRE and REC (A/C system)
l Rear View Monitor Possible Route Line Center Position Adjustment (if
equipped)
l Steering Angle Sensor Neutral Position
11. Inform the customer they will need to "reset" their Automatic Drive Positioner.
SEATBACK FINISHER REMOVAL
l 2 top hooks
l 2 side hooks
l 2 bottom clips
Fig. 3: Seatback Finisher Parts
1. Reach under the seat and disconnect the 2 elastic straps for the toe flap.
Fig. 4: Toe Flap
2. Insert your fingers behind the bottom corners of the finisher.
3. Pull the finisher to unsnap the bottom clips.
CAUTION: Use covers as needed to protect interior surfaces from being
scratched or damaged.
NOTE: This bulletin contains additional helpful information for:
l Seatback Finisher Removal.
l Seat Side Finisher Removal.
NOTE: The seatback finisher is held on with:
2009 Nissan Maxima S
2009-2010 MAXIMA; DRIVER'S SEAT BOTTOM SHIFTS SLIGHTLY
2020年3月30日 12:53:06 Page 3 © 2011 Mitchell Repair Information Company, LLC.
Fig. 5: Bottom Clips
4. Hold the finisher on the outboard side (side towards the door).
5. Pull the finisher to unsnap the outboard side hook.
Fig. 6: Unsnapping Outboard Side Hook
6. Hold the top of the finisher and push it down about 1 inch.
Fig. 7: Top Of Finisher
7. Pull out on the outboard side of the finisher.
8. Reach behind the finisher.
Fig. 8: Side Hook Location
9. Unsnap the inboard side hook.
Fig. 9: Inboard Side Hook
SEAT SIDE FINISHER REMOVAL
1. Carefully pull out on the center of the finisher.
2. At the rear of the finisher, insert a plastic trim tool in the gap.
3. Carefully pry between outer and inner finisher.
Fig. 10: Removing Finisher
4. Continue to pull while pushing on each clip.
l See Fig. 12 for clip locations.
Fig. 11: Pushing On Each Clip
5. With the rear of the finisher unclipped, carefully pull on the finisher to release
the 4 side clips.
l See Fig. 12 for side clip locations.
Fig. 12: Finisher Clips
6. To release the front clip:
a. Pull on the front edge of the finisher,
b. And pry between the finisher and the seat frame with a plastic trim tool.
Fig. 13: Front Edge of Finisher
NOTE: The front clip is released in step 6.
2009 Nissan Maxima S
2009-2010 MAXIMA; DRIVER'S SEAT BOTTOM SHIFTS SLIGHTLY
2020年3月30日 12:53:06 Page 4 © 2011 Mitchell Repair Information Company, LLC.
NOTE: l Use a new side finisher and front finisher during reassembly.
l Front and side finishers are listed in the Parts Information.
2009 Nissan Maxima S
2009-2010 MAXIMA; DRIVER'S SEAT BOTTOM SHIFTS SLIGHTLY
2020年3月30日 12:53:06 Page 5 © 2011 Mitchell Repair Information Company, LLC.
TECHNICAL SERVICE BULLETIN
Reference Number(s): NTB09-092b, Date of Issue: June 16, 2010
Superceded Bulletin(s): NTB09-092A, Date of Issue: February 15, 2010
IF YOU CONFIRM
The driver's seat bottom very slightly "rocks" and/or "shifts" back and forth when
accelerating, braking, or when making a turn.
ACTION
Replace the driver seat frame (adjuster assembly) with a new one.
l During reassembly use new side and front seat finishers.
Fig. 1: Seat Frame (Adjuster Assembly)
PARTS INFORMATION
PARTS INFORMATION
NISSAN: 2009-2010 Maxima
CLASSIFICATION: BT09-039b
APPLIED VEHICLES: 2009-2010 Maxima (A35)
APPLIED VIN: 2009 vehicles - All; 2010 vehicles built before 1N4AA(****)AC 825954
APPLIED DATE: Vehicles built before December 2, 2009
NOTE: This bulletin has been amended. The Service Procedure and Parts
Information have been revised. Please discard previous versions of this
bulletin.
IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you
will be performing. You MUST closely follow the entire Service Procedure as
it contains information that is essential to successfully completing this
repair.
DESCRIPTION
COLOR /
CODE
P/N QTY
Frame Assy - Front Seat
Cushion (Seat Adjuster
Assy.)
N/A
Use the VIN and electronic parts
catalog (FAST or equivalent) to
determine the correct P/N
1
Side Finisher
Frost / K 87381-9N10A
1
Charcoal /
G
87381-9N10B
Tan
(Beige) / C
87381-9N10C
2009 Nissan Maxima S
2009-2010 MAXIMA; DRIVER'S SEAT BOTTOM SHIFTS SLIGHTLY
2020年3月30日 12:53:06 Page 1 © 2011 Mitchell Repair Information 11 Company, LLC.
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
CLAIMS INFORMATION
SERVICE PROCEDURE
1. Write down all radio station pre-sets.
Radio Station Pre-sets
2. If equipped - write down / record the following customer settings for the ATC
(Automatic Temperature Control) system (refer to the ESM as needed):
l Temperature Setting Trimmer
l Foot Position Setting Trimmer
l Inlet Port Memory Function
3. Turn the ignition switch OFF.
4. Disconnect both battery cables - negative cable first.
5. WARNING: Wait for at least 3 minutes before removing the driver seat:
6. Carefully remove the driver seat from the vehicle.
l Refer to section SE of the ESM for Seat Removal Information .
Front Finisher
Frost / K 87374-9N10A
Charcoal /
G
87374-9N00B
Tan
(Beige) / C
87374-9N00C
DESCRIPTION PFP OP CODE SYM DIA FRT
RPL Left Seat Cushion Frame Ass'y (1) VH32AA ZJ 46 (2)
(1) Refer to FAST or equivalent and use the Frame Assy.-Seat Cushion P/N as the
PFP.
(2) Refer to the current Nissan Warranty Flat Rate Manual and use the indicated
FRT.
IMPORTANT: Follow all cautions, warnings, and notes in the Electronic Service Manual
(ESM) when working on or near a Supplemental Restraint System (SRS),
such as an air bag.
Presets 1 2 3 4 5 6
A
B
C
SAT
2009 Nissan Maxima S
2009-2010 MAXIMA; DRIVER'S SEAT BOTTOM SHIFTS SLIGHTLY
2020年3月30日 12:53:06 Page 2 © 2011 Mitchell Repair Information Company, LLC.
7. Replace the seat frame / adjuster assembly.
l Refer to the ESM - SE Section, Front Seat Driver Side: Disassembly and
Assembly.
l During reassembly use a new side finisher and new front finisher listed in
the Parts Information.
Fig. 2: Seat Frame (Adjuster Assembly)
8. Connect the battery cables - positive cable first.
9. Reset the clock and the radio station presets.
10. Refer to the Service Manual for the following "reset / relearn" procedures:
l Power Window Initialization
l Sunroof Memory Reset/Initialization
l ATC Temperature Setting Trimmer (A/C system)
l ATC Foot Position Setting Trimmer (A/C system)
l ATC Inlet Port Memory Function - FRE and REC (A/C system)
l Rear View Monitor Possible Route Line Center Position Adjustment (if
equipped)
l Steering Angle Sensor Neutral Position
11. Inform the customer they will need to "reset" their Automatic Drive Positioner.
SEATBACK FINISHER REMOVAL
l 2 top hooks
l 2 side hooks
l 2 bottom clips
Fig. 3: Seatback Finisher Parts
1. Reach under the seat and disconnect the 2 elastic straps for the toe flap.
Fig. 4: Toe Flap
2. Insert your fingers behind the bottom corners of the finisher.
3. Pull the finisher to unsnap the bottom clips.
CAUTION: Use covers as needed to protect interior surfaces from being
scratched or damaged.
NOTE: This bulletin contains additional helpful information for:
l Seatback Finisher Removal.
l Seat Side Finisher Removal.
NOTE: The seatback finisher is held on with:
2009 Nissan Maxima S
2009-2010 MAXIMA; DRIVER'S SEAT BOTTOM SHIFTS SLIGHTLY
2020年3月30日 12:53:06 Page 3 © 2011 Mitchell Repair Information Company, LLC.
Fig. 5: Bottom Clips
4. Hold the finisher on the outboard side (side towards the door).
5. Pull the finisher to unsnap the outboard side hook.
Fig. 6: Unsnapping Outboard Side Hook
6. Hold the top of the finisher and push it down about 1 inch.
Fig. 7: Top Of Finisher
7. Pull out on the outboard side of the finisher.
8. Reach behind the finisher.
Fig. 8: Side Hook Location
9. Unsnap the inboard side hook.
Fig. 9: Inboard Side Hook
SEAT SIDE FINISHER REMOVAL
1. Carefully pull out on the center of the finisher.
2. At the rear of the finisher, insert a plastic trim tool in the gap.
3. Carefully pry between outer and inner finisher.
Fig. 10: Removing Finisher
4. Continue to pull while pushing on each clip.
l See Fig. 12 for clip locations.
Fig. 11: Pushing On Each Clip
5. With the rear of the finisher unclipped, carefully pull on the finisher to release
the 4 side clips.
l See Fig. 12 for side clip locations.
Fig. 12: Finisher Clips
6. To release the front clip:
a. Pull on the front edge of the finisher,
b. And pry between the finisher and the seat frame with a plastic trim tool.
Fig. 13: Front Edge of Finisher
NOTE: The front clip is released in step 6.
2009 Nissan Maxima S
2009-2010 MAXIMA; DRIVER'S SEAT BOTTOM SHIFTS SLIGHTLY
2020年3月30日 12:53:06 Page 4 © 2011 Mitchell Repair Information Company, LLC.
NOTE: l Use a new side finisher and front finisher during reassembly.
l Front and side finishers are listed in the Parts Information.
2009 Nissan Maxima S
2009-2010 MAXIMA; DRIVER'S SEAT BOTTOM SHIFTS SLIGHTLY
2020年3月30日 12:53:06 Page 5 © 2011 Mitchell Repair Information Company, LLC.
Comments
Post a Comment