Skip to main content

2019 Nissan-Datsun Altima Diagnostic and Repair Information # 11-050 Date: 110513

2019 Nissan-Datsun Altima Diagnostic and Repair Information # 11-050 Date: 110513



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 276



Interior - Revised Seat Back Service Procedure



Classification: BT11-019



Reference: NTB11-050



Date: May 13, 2011



2007-2011 ALTIMA; REVISED FRONT SEAT BACK SERVICE PROCEDURES



APPLIED VEHICLES: 2007-2011 Altima Coupe, Sedan, and Hybrid (C/L32/HV)



SERVICE INFORMATION



For 2007-2011 Altima vehicles, new front seat back disassembly and assembly procedures have been developed as the result of some service parts



now being available (for example, seat side air bag module).



Updated Service Manuals for 2010-2011 Altima vehicles will be distributed to the field as quickly as possible. For 2007-2009 vehicles, the updated



procedures will be available on ASIST as a Service Manual Amendment (SMA).



Until the updated Service Manuals are made available, please use the updated service information shown below if you need to service the front seat



back(s) for any reason.



NOTE:



The standard Flat Rate Times will be updated to reflect the new procedures.



Refer to images below view the revised SEAT (SE) section information.



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 277



Index/Contents



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 278



SE-2



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 279



SE-3



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 280



SE-4



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 281



SE-5



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 282



SE-6



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 283



SE-7



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 284



SE-8



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 285



SE-9



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 286



SE-10



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 287



SE-11



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 288



SE-12



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 289



SE-13



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 290



SE-14



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 291



SE-15



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 292



SE-16



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 293



SE-17



COUPE - UNIT DISASSEMBLY AND ASSEMBLY



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 294



SE-18



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 295



SE-19



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 296



SE-20



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 297



SE-21



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 298



SE-22



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 299



SE-23



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 300



SE-24



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 301



SE-25



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 302



SE-26



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 303



SE-27



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 304



SE-28



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 305



SE-29



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 306



SE-30



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 307



SE-31



SEDAN - UNIT DISASSEMBLY AND ASSEMBLY

Comments

Popular posts from this blog

C1140 C1140 ACTUATOR RLY

**************************** **************************** C1140 C1140 ACTUATOR RLY Description Activates or deactivates each solenoid valve according to the signals transmitted by the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1140. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Check terminal for deformation, disconnection, looseness, and so on. If any malfunction is found, repair or replace terminal. Nissan-Datsun Truck Armada 2WD V8-5.6L (VK56DE)  C CODE Page 49 4. Reconnect

C1144 C1143, C1144 STEERING ANGLE SENSOR

**************************** **************************** C1144 C1143, C1144 STEERING ANGLE SENSOR Description The steering angle sensor detects the rotation amount, angular velocity and direction of the steering wheel, and transmits the data to the ABS actuator and electric unit (control unit) via CAN communication. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1143. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Disconnect steering angle sensor connector. 4. Check terminal for deformation, disconnection, looseness, and so on.

C1142 C1142 PRESS SENSOR

**************************** **************************** C1142 C1142 PRESS SENSOR Description The front and rear pressure sensors convert the brake fluid pressure to an electric signal and transmit it to the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1142. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. FRONT PRESSURE SENSOR 1.CONNECTOR INSPECTION 1. Turn the ignition switch OFF. 2. Disconnect the front pressure sensor connector and ABS actuator and electric unit (control unit) connector and inspect the terminals for deformation, disconnection, looseness, or damage. Is the inspection result normal? YE