****************************
****************************
Nissan Armada Technical Service Bulletin # 08-106D Date: 120529
Navigation System - HDD Map Data Upgrade Information
Classification: EL08-027D
Reference: NTB08-106D
Date: May 29, 2012
UPGRADING HDD NAVIGATION MAP DATA
This bulletin has been amended to include a NOTE under "Section 4 Acquiring the install key" after step 3 for "Invalid Coupon Code" and to add a
Quick Referance under "Section 4 Acquiring the install key". No other changes have been made to the body of this bulletin. Please discard previous
versions.
APPLIED VEHICLES
SERVICE INFORMATION
The navigation system (if equipped) in the Applied Vehicles listed above has an HDD (Hard Disc Drive) map data storage system. This bulletin
contains the information and instructions for updating/upgrading the map data with a new version.
An instruction manual for HDD Navigation Updates is also available in ASIST under Select Specialty Tools > HD Navi. Tools > Hard Drive
Nissan Armada 2wd v8 5.6L Parts Service 87
Navigation Update Manual.
When new versions of map data are available, customers can purchase a Coupon Number via the internet at www.nissannavigation.com or by calling
NAVTEQ at 1-866-462-8837. The customer then takes their vehicle, along with the Coupon Number, to a Nissan dealer to have the new version of
map data installed into their navigation system. The time needed to install the new map data into the vehicle is approximately 30 minutes.
The HDD update kit (P/N: J-48850-A) is required to perform map data updates. One HDD update kit was shipped to each dealership in the fall of
2008 as part of the essential tool program. See HDD update kit (P/N: J-48850-A) for kit details.
Make sure to use the newest Map Data Master Discs (2 disc set) when performing HDD Navigation Map Data Upgrades.
^ As of the publication date of this bulletin the newest disc set is 2012MY (11-12).
^ Additional Master Discs are available from TECH-MATE.
Important/Index
IMPORTANT:
^ Make sure your ASIST has been freshly synchronized and all C-III plus updates have been installed. The HDD (Hard Disc Drive) rewrite
software is delivered via ASIST synchronization.
^ Before the map upgrade can be performed, a Coupon Number must be purchased from www.nissannavigation.com or by calling NAVTEQ
at 1-866-462-8837.
^ Before starting, it is recommend that you check the Current Map Version in the vehicle using the vehicles navigation screen to make sure
an upgrade is needed (see Checking Current Map Version in the Vehicle Using the vehicle's Navigation Screen).
Overview of the HDD (Hard Disc Drive) Map Upgrade
This procedure is divided into 7 sections. Complete each section in the order shown in the above index.
Section 1: Installing the Update MAP Into Assist
SECTION 1: INSTALLING THE UPDATE MAP INTO ASSIST
^ Once the newest version is installed into the Consult PC it can be used to upgrade many HDD navigation systems. It is not necessary to
install the updated map each time you perform a map data upgrade.
Nissan Armada 2wd v8 5.6L Parts Service 88
^ If the newest map data is already installed in the Consult PC, you can skip to Section 2.
1. Connect the DVD drive to the Consult PC with the USB cable.
2. Turn ON the Consult PC.
3. Open / start ASIST.
4. Select Specialty Tools, Then HD Navi. Tools.
Nissan Armada 2wd v8 5.6L Parts Service 89
5. Select Install Map Update
6. Select Installing updated map
7. Insert the Map Data Master Disc 1 into the DVD drive.
8. Confirm the correct name of the DVD drive is displayed (see Figure 1-5).
Nissan Armada 2wd v8 5.6L Parts Service 90
^ "E" is likely the correct name for the DVD drive.
^ The DVD drive name may be different depending on the drive configuration of your C-III computer.
9. Select START
^ Installation of the update map will start and a progress screen will display.
^ Installation will take several minutes.
^ At about 35% this message will display as shown above.
^ When you get the above message, remove Disc 1; install Disc 2; then select YES.
^ When installation is complete the screen shown in Figure 1-8 will display.
Nissan Armada 2wd v8 5.6L Parts Service 91
10. Select OK
11. Select EXIT
12. Remove Disc 2 from the DVD drive.
13. Select the Safely Remove Hardware icon on the "system tray" which is displayed in the bottom right of the Consult PC screen.
^ You may need to click on the "expand arrow" to expand the icon selections.
14. Select "Safely remove USB Mass Storage Device" - Drive (E:)
^ The drive name will likely be E, but may be different depending on the drive configuration of your Consult PC.
Nissan Armada 2wd v8 5.6L Parts Service 92
15. Disconnect the DVD drive from the Consult PC.
Section 2: Connecting the Consult PC to the HDD Navigation System
SECTION 2: CONNECTING the Consult PC TO THE HDD NAVIGATION SYSTEM
^ All navigation components must be installed in the vehicle and connected correctly.
^ Make sure the vehicle battery is charged and connected.
^ Do not touch the CF (Compact Flash) adapter with wet hands.
CAUTION:
^ Do not turn the ignition ON when the Consult PC is connected to the navigation system with the CF (Compact Flash) adapter.
^ Obey the following instructions; otherwise the CF Adapter, CF card slot, or navigation system may be damaged.
1. Make sure the ignition is OFF.
2. Close any applications that are running on the Consult PC.
^ If the Consult PC is OFF, leave it OFF for now.
3. Connect USB cable to the Consult PC.
^ Make sure connector is fully inserted.
4. Connect the other end of the USB cable to the CF (Compact Flash) adapter.
^ Make sure connector is fully inserted.
Nissan Armada 2wd v8 5.6L Parts Service 93
5. Carefully insert the CF adapter into the CF card slot of the vehicle audio/navigation system.
^ Label side up.
^ Insert it all the way (firmly), to its stop.
Section 3: Generating the Certification Number
SECTION 3: GENERATING THE CERTIFICATION NUMBER
^ The Certification Number is different for each HDD (Hard Disc Drive) navigation system. Make sure you are connected with the CF
adaptor to the system (vehicle) that you will be updating.
1. Turn ON the Consult PC.
2. Open / start ASIST.
3. Select Specialty Tools, Then HD Navi. Tools.
Nissan Armada 2wd v8 5.6L Parts Service 94
4. Select Install Map Update
5. Select Generation and confirmation of Certification number.
NOTE:
If the HDD Rewrite application was open/running when you connected to the navigation system (plugged in the CF adapter), the
navigation system may not be recognized and you may get an error message. In this case, exit/close ASIST, then start it again (reopen it).
Nissan Armada 2wd v8 5.6L Parts Service 95
6. Click START
NOTE:
If you get the message shown in Figure 3-5:
^ The map data installed in your Consult PC is the same or older than the map data in the vehicle. The map update may not be needed.
a. Skip to Section 6 (disconnect the Consult PC from the vehicle navigation system).
b. Check the map version in the vehicle.
7. Write down the Certification Number.
Nissan Armada 2wd v8 5.6L Parts Service 96
8. Select OK
Section 4: Acquiring the Install Key
SECTION 4: ACQUIRING THE INSTALL KEY
^ Before starting this section, you need:
> A Coupon Number (purchased from NAVTEQ via the Internet at www.nissannavigation.com or by calling NAVTEQ at
1-866-462-8837).
> A Certification No. (generated from the vehicle HDD navigation unit in Section 3).
^ The Consult PC must be connected to the Internet for this Section.
NOTE:
This section can be done using any PC containing ASIST or at any desktop computer. An Internet connection is required. Enter this
Internet address: http://www.nissan-mapupdate.com
> Or if a smart phone is available that has a "QR scanner App" and Internet service, scan below.
^ To access the license server to acquire an Install Key (Install Code), your Internet browser must be set to accept cookies.
^ Once you have acquired the Install Key from the license server, cancellation and reissue of the Install Key is not allowed.
^ The acquired Install Key is valid for only three days from the date of issue.
^ You can retry the upgrade operation by using the same Install Key at any time during the three day period, but it cannot be used after the
three day period has expired.
^ If you forgot the Install Key during the three day period, you can obtain the same Key by performing this section again. The key is still
only valid for 3 days from the original date of issue.
1. If a Login screen is displayed after accessing the Nissan-mapupdate website, enter user ID "nissan" and password "nis06map", then select
Login.
Nissan Armada 2wd v8 5.6L Parts Service 97
2. Enter the following numbers correctly (see Figure 4-3):
^ Coupon No. (Coupon No. purchased from NAVTEQ)
^ Todays Date
^ Certification No. (number generated from vehicle HDD navigation unit in Section 3)
3. Select CONTINUE
NOTE:
^ If you receive an error message "Invalid Coupon Code", please log on to another computer that is not a CONSULT PC and repeat steps 1
through 3.
^ After obtaining the install Key, please return to the original Consult PC that generated the certification code.
Nissan Armada 2wd v8 5.6L Parts Service 98
4. On the next screen (Confirmation of Install Key Request), confirm all the numbers you entered are correct. (See Figure 4-4).
5. Select ISSUE
6. Select PRINT to print the screen, or write down the Install Key exactly.
Nissan Armada 2wd v8 5.6L Parts Service 99
7. After printing the screen or writing down the Install Key, select COMPLETED.
8. Close the Internet window.
Section 5: Upgrading the MAP Data In the HDD Navigation System
SECTION 5: UPGRADING THE MAP DATA IN THE HDD NAVIGATION SYSTEM
^ Make sure to perform this operation on the same HDD navigation unit (vehicle) from which you generated the Certification Number.
^ Upgrading the map data cannot be performed by using an Install Key that was acquired by using a Certification Number generated from a
different HDD navigation system.
^ Make sure to use the same the Consult PC that was used to generate the Certification Number.
1. Connect the Consult PC power cord (A.C. adapter or vehicle D.C. adapter).
^ Updating the map data will take a few minutes. Connecting the power cord will ensure the Consult PC maintains power during the update.
^ Vehicle ignition must remain OFF
2. Select Specialty Tools, Then HD Navi. Tools.
Nissan Armada 2wd v8 5.6L Parts Service 100
3. Select Install Map Update
4. Select Map update
5. Select NEXT
Nissan Armada 2wd v8 5.6L Parts Service 101
6. Carefully enter the Install Key.
7. Select NEXT
8. Confirm the version number of "New version of map data" is higher than "Current version of map data".
9. Select START
Nissan Armada 2wd v8 5.6L Parts Service 102
^ Map update will begin and a progress bar will be displayed as shown in Figure 5-7.
^ When update is complete the screen in Figure 5-8 will display.
10. Select OK
NOTE:
If the update does not complete correctly, do the following:
a. Perform Section 6: Disconnecting the Consult PC and CF Adaptor.
b. Make sure the vehicle battery is sufficiently charged.
c. Perform Section 2 again: Connecting the Consult PC to the HDD Navigation System.
d. Perform Section 5 again: Upgrading the Map Data in the HDD Navigation System.
Section 6: Disconnecting the Consult PC and CF Adapter
SECTION 6: DISCONNECTING the Consult PC and CF (Compact Flash) ADAPTER.
NOTE:
Do not touch the CF (Compact Flash) adapter with wet hands.
Nissan Armada 2wd v8 5.6L Parts Service 103
1. Select EXIT
2. Select the Safely Remove Hardware icon on the "system tray" which is displayed in the bottom right of the Consult PC computer screen.
^ You may need to click on the "expand arrow" to expand the icon selections.
3. Select Safely remove USB Mass Storage Device
4. After the message "Safe to Remove Hardware" is displayed, disconnect the USB cable from the Consult PC.
Nissan Armada 2wd v8 5.6L Parts Service 104
5. Push the Eject button at the right of the CF card slot and carefully remove the CF adapter.
NOTE:
When not in use, store the CF adapter in its original plastic bag.
Section 7: Verifying the Upgrade Result
SECTION 7: VERIFYING THE UPGRADE RESULT
^ When the map data upgrade operation is complete, confirm that the HDD navigation system is operating correctly.
^ Make sure the CF adapter is disconnected from the navigation system before performing the following steps.
1. Turn the ignition ON.
^ If the ignition is already ON, turn it OFF and then back ON.
2. The Program Loading screen as shown in Figure 7-1 will display.
^ This process may take only a few seconds to complete or it may take a few minutes.
Nissan Armada 2wd v8 5.6L Parts Service 105
3. Select MAP, then ENTER.
^ Make sure the navigation map displays and the system functions correctly.
NOTE:
You can confirm the new map version in the vehicle using the navigation screen; see below.
^ If the fail-safe screen is displayed as shown in Figure 7-3, the map data upgrade failed.
Turn the ignition OFF; return to the beginning of the Service Procedure and follow all steps again exactly as written.
Checking Current MAP Version In the Vehicle Using the Nav. Screen
Checking Current Map Version in the Vehicle Using the Vehicles Navigation Screen
^ Make sure the CF (Compact Flash) adapter is disconnected from the navigation system before performing the following steps.
1. Turn the Ignition to ON or ACC, and turn ON the navigation system.
2. Select INFO
3. Use the arrows and enter buttons on the Multifunction Controller to select Navigation Version.
Nissan Armada 2wd v8 5.6L Parts Service 106
^ The navigation / map version displays as shown in Figure 8-3.
****************************
Nissan Armada Technical Service Bulletin # 08-106D Date: 120529
Navigation System - HDD Map Data Upgrade Information
Classification: EL08-027D
Reference: NTB08-106D
Date: May 29, 2012
UPGRADING HDD NAVIGATION MAP DATA
This bulletin has been amended to include a NOTE under "Section 4 Acquiring the install key" after step 3 for "Invalid Coupon Code" and to add a
Quick Referance under "Section 4 Acquiring the install key". No other changes have been made to the body of this bulletin. Please discard previous
versions.
APPLIED VEHICLES
SERVICE INFORMATION
The navigation system (if equipped) in the Applied Vehicles listed above has an HDD (Hard Disc Drive) map data storage system. This bulletin
contains the information and instructions for updating/upgrading the map data with a new version.
An instruction manual for HDD Navigation Updates is also available in ASIST under Select Specialty Tools > HD Navi. Tools > Hard Drive
Nissan Armada 2wd v8 5.6L Parts Service 87
Navigation Update Manual.
When new versions of map data are available, customers can purchase a Coupon Number via the internet at www.nissannavigation.com or by calling
NAVTEQ at 1-866-462-8837. The customer then takes their vehicle, along with the Coupon Number, to a Nissan dealer to have the new version of
map data installed into their navigation system. The time needed to install the new map data into the vehicle is approximately 30 minutes.
The HDD update kit (P/N: J-48850-A) is required to perform map data updates. One HDD update kit was shipped to each dealership in the fall of
2008 as part of the essential tool program. See HDD update kit (P/N: J-48850-A) for kit details.
Make sure to use the newest Map Data Master Discs (2 disc set) when performing HDD Navigation Map Data Upgrades.
^ As of the publication date of this bulletin the newest disc set is 2012MY (11-12).
^ Additional Master Discs are available from TECH-MATE.
Important/Index
IMPORTANT:
^ Make sure your ASIST has been freshly synchronized and all C-III plus updates have been installed. The HDD (Hard Disc Drive) rewrite
software is delivered via ASIST synchronization.
^ Before the map upgrade can be performed, a Coupon Number must be purchased from www.nissannavigation.com or by calling NAVTEQ
at 1-866-462-8837.
^ Before starting, it is recommend that you check the Current Map Version in the vehicle using the vehicles navigation screen to make sure
an upgrade is needed (see Checking Current Map Version in the Vehicle Using the vehicle's Navigation Screen).
Overview of the HDD (Hard Disc Drive) Map Upgrade
This procedure is divided into 7 sections. Complete each section in the order shown in the above index.
Section 1: Installing the Update MAP Into Assist
SECTION 1: INSTALLING THE UPDATE MAP INTO ASSIST
^ Once the newest version is installed into the Consult PC it can be used to upgrade many HDD navigation systems. It is not necessary to
install the updated map each time you perform a map data upgrade.
Nissan Armada 2wd v8 5.6L Parts Service 88
^ If the newest map data is already installed in the Consult PC, you can skip to Section 2.
1. Connect the DVD drive to the Consult PC with the USB cable.
2. Turn ON the Consult PC.
3. Open / start ASIST.
4. Select Specialty Tools, Then HD Navi. Tools.
Nissan Armada 2wd v8 5.6L Parts Service 89
5. Select Install Map Update
6. Select Installing updated map
7. Insert the Map Data Master Disc 1 into the DVD drive.
8. Confirm the correct name of the DVD drive is displayed (see Figure 1-5).
Nissan Armada 2wd v8 5.6L Parts Service 90
^ "E" is likely the correct name for the DVD drive.
^ The DVD drive name may be different depending on the drive configuration of your C-III computer.
9. Select START
^ Installation of the update map will start and a progress screen will display.
^ Installation will take several minutes.
^ At about 35% this message will display as shown above.
^ When you get the above message, remove Disc 1; install Disc 2; then select YES.
^ When installation is complete the screen shown in Figure 1-8 will display.
Nissan Armada 2wd v8 5.6L Parts Service 91
10. Select OK
11. Select EXIT
12. Remove Disc 2 from the DVD drive.
13. Select the Safely Remove Hardware icon on the "system tray" which is displayed in the bottom right of the Consult PC screen.
^ You may need to click on the "expand arrow" to expand the icon selections.
14. Select "Safely remove USB Mass Storage Device" - Drive (E:)
^ The drive name will likely be E, but may be different depending on the drive configuration of your Consult PC.
Nissan Armada 2wd v8 5.6L Parts Service 92
15. Disconnect the DVD drive from the Consult PC.
Section 2: Connecting the Consult PC to the HDD Navigation System
SECTION 2: CONNECTING the Consult PC TO THE HDD NAVIGATION SYSTEM
^ All navigation components must be installed in the vehicle and connected correctly.
^ Make sure the vehicle battery is charged and connected.
^ Do not touch the CF (Compact Flash) adapter with wet hands.
CAUTION:
^ Do not turn the ignition ON when the Consult PC is connected to the navigation system with the CF (Compact Flash) adapter.
^ Obey the following instructions; otherwise the CF Adapter, CF card slot, or navigation system may be damaged.
1. Make sure the ignition is OFF.
2. Close any applications that are running on the Consult PC.
^ If the Consult PC is OFF, leave it OFF for now.
3. Connect USB cable to the Consult PC.
^ Make sure connector is fully inserted.
4. Connect the other end of the USB cable to the CF (Compact Flash) adapter.
^ Make sure connector is fully inserted.
Nissan Armada 2wd v8 5.6L Parts Service 93
5. Carefully insert the CF adapter into the CF card slot of the vehicle audio/navigation system.
^ Label side up.
^ Insert it all the way (firmly), to its stop.
Section 3: Generating the Certification Number
SECTION 3: GENERATING THE CERTIFICATION NUMBER
^ The Certification Number is different for each HDD (Hard Disc Drive) navigation system. Make sure you are connected with the CF
adaptor to the system (vehicle) that you will be updating.
1. Turn ON the Consult PC.
2. Open / start ASIST.
3. Select Specialty Tools, Then HD Navi. Tools.
Nissan Armada 2wd v8 5.6L Parts Service 94
4. Select Install Map Update
5. Select Generation and confirmation of Certification number.
NOTE:
If the HDD Rewrite application was open/running when you connected to the navigation system (plugged in the CF adapter), the
navigation system may not be recognized and you may get an error message. In this case, exit/close ASIST, then start it again (reopen it).
Nissan Armada 2wd v8 5.6L Parts Service 95
6. Click START
NOTE:
If you get the message shown in Figure 3-5:
^ The map data installed in your Consult PC is the same or older than the map data in the vehicle. The map update may not be needed.
a. Skip to Section 6 (disconnect the Consult PC from the vehicle navigation system).
b. Check the map version in the vehicle.
7. Write down the Certification Number.
Nissan Armada 2wd v8 5.6L Parts Service 96
8. Select OK
Section 4: Acquiring the Install Key
SECTION 4: ACQUIRING THE INSTALL KEY
^ Before starting this section, you need:
> A Coupon Number (purchased from NAVTEQ via the Internet at www.nissannavigation.com or by calling NAVTEQ at
1-866-462-8837).
> A Certification No. (generated from the vehicle HDD navigation unit in Section 3).
^ The Consult PC must be connected to the Internet for this Section.
NOTE:
This section can be done using any PC containing ASIST or at any desktop computer. An Internet connection is required. Enter this
Internet address: http://www.nissan-mapupdate.com
> Or if a smart phone is available that has a "QR scanner App" and Internet service, scan below.
^ To access the license server to acquire an Install Key (Install Code), your Internet browser must be set to accept cookies.
^ Once you have acquired the Install Key from the license server, cancellation and reissue of the Install Key is not allowed.
^ The acquired Install Key is valid for only three days from the date of issue.
^ You can retry the upgrade operation by using the same Install Key at any time during the three day period, but it cannot be used after the
three day period has expired.
^ If you forgot the Install Key during the three day period, you can obtain the same Key by performing this section again. The key is still
only valid for 3 days from the original date of issue.
1. If a Login screen is displayed after accessing the Nissan-mapupdate website, enter user ID "nissan" and password "nis06map", then select
Login.
Nissan Armada 2wd v8 5.6L Parts Service 97
2. Enter the following numbers correctly (see Figure 4-3):
^ Coupon No. (Coupon No. purchased from NAVTEQ)
^ Todays Date
^ Certification No. (number generated from vehicle HDD navigation unit in Section 3)
3. Select CONTINUE
NOTE:
^ If you receive an error message "Invalid Coupon Code", please log on to another computer that is not a CONSULT PC and repeat steps 1
through 3.
^ After obtaining the install Key, please return to the original Consult PC that generated the certification code.
Nissan Armada 2wd v8 5.6L Parts Service 98
4. On the next screen (Confirmation of Install Key Request), confirm all the numbers you entered are correct. (See Figure 4-4).
5. Select ISSUE
6. Select PRINT to print the screen, or write down the Install Key exactly.
Nissan Armada 2wd v8 5.6L Parts Service 99
7. After printing the screen or writing down the Install Key, select COMPLETED.
8. Close the Internet window.
Section 5: Upgrading the MAP Data In the HDD Navigation System
SECTION 5: UPGRADING THE MAP DATA IN THE HDD NAVIGATION SYSTEM
^ Make sure to perform this operation on the same HDD navigation unit (vehicle) from which you generated the Certification Number.
^ Upgrading the map data cannot be performed by using an Install Key that was acquired by using a Certification Number generated from a
different HDD navigation system.
^ Make sure to use the same the Consult PC that was used to generate the Certification Number.
1. Connect the Consult PC power cord (A.C. adapter or vehicle D.C. adapter).
^ Updating the map data will take a few minutes. Connecting the power cord will ensure the Consult PC maintains power during the update.
^ Vehicle ignition must remain OFF
2. Select Specialty Tools, Then HD Navi. Tools.
Nissan Armada 2wd v8 5.6L Parts Service 100
3. Select Install Map Update
4. Select Map update
5. Select NEXT
Nissan Armada 2wd v8 5.6L Parts Service 101
6. Carefully enter the Install Key.
7. Select NEXT
8. Confirm the version number of "New version of map data" is higher than "Current version of map data".
9. Select START
Nissan Armada 2wd v8 5.6L Parts Service 102
^ Map update will begin and a progress bar will be displayed as shown in Figure 5-7.
^ When update is complete the screen in Figure 5-8 will display.
10. Select OK
NOTE:
If the update does not complete correctly, do the following:
a. Perform Section 6: Disconnecting the Consult PC and CF Adaptor.
b. Make sure the vehicle battery is sufficiently charged.
c. Perform Section 2 again: Connecting the Consult PC to the HDD Navigation System.
d. Perform Section 5 again: Upgrading the Map Data in the HDD Navigation System.
Section 6: Disconnecting the Consult PC and CF Adapter
SECTION 6: DISCONNECTING the Consult PC and CF (Compact Flash) ADAPTER.
NOTE:
Do not touch the CF (Compact Flash) adapter with wet hands.
Nissan Armada 2wd v8 5.6L Parts Service 103
1. Select EXIT
2. Select the Safely Remove Hardware icon on the "system tray" which is displayed in the bottom right of the Consult PC computer screen.
^ You may need to click on the "expand arrow" to expand the icon selections.
3. Select Safely remove USB Mass Storage Device
4. After the message "Safe to Remove Hardware" is displayed, disconnect the USB cable from the Consult PC.
Nissan Armada 2wd v8 5.6L Parts Service 104
5. Push the Eject button at the right of the CF card slot and carefully remove the CF adapter.
NOTE:
When not in use, store the CF adapter in its original plastic bag.
Section 7: Verifying the Upgrade Result
SECTION 7: VERIFYING THE UPGRADE RESULT
^ When the map data upgrade operation is complete, confirm that the HDD navigation system is operating correctly.
^ Make sure the CF adapter is disconnected from the navigation system before performing the following steps.
1. Turn the ignition ON.
^ If the ignition is already ON, turn it OFF and then back ON.
2. The Program Loading screen as shown in Figure 7-1 will display.
^ This process may take only a few seconds to complete or it may take a few minutes.
Nissan Armada 2wd v8 5.6L Parts Service 105
3. Select MAP, then ENTER.
^ Make sure the navigation map displays and the system functions correctly.
NOTE:
You can confirm the new map version in the vehicle using the navigation screen; see below.
^ If the fail-safe screen is displayed as shown in Figure 7-3, the map data upgrade failed.
Turn the ignition OFF; return to the beginning of the Service Procedure and follow all steps again exactly as written.
Checking Current MAP Version In the Vehicle Using the Nav. Screen
Checking Current Map Version in the Vehicle Using the Vehicles Navigation Screen
^ Make sure the CF (Compact Flash) adapter is disconnected from the navigation system before performing the following steps.
1. Turn the Ignition to ON or ACC, and turn ON the navigation system.
2. Select INFO
3. Use the arrows and enter buttons on the Multifunction Controller to select Navigation Version.
Nissan Armada 2wd v8 5.6L Parts Service 106
^ The navigation / map version displays as shown in Figure 8-3.
