Skip to main content

Nissan Armada Technical Service Bulletin # 10-052 Date: 100408

****************************
****************************

Nissan Armada Technical Service Bulletin # 10-052 Date: 100408
Drivetrain - Driveshaft U-Joint Noise/Vibration
Classification: PD10-001
Reference: NTB10-052
Date: April 8, 2010
NOISE AND/OR VIBRATION FROM PROPELLER SHAFT U-JOINT (JOURNAL/JOURNAL BEARINGS)
APPLIED VEHICLES:
2004-2010 Armada (TA60)
2004-2010 Titan (A60)
2005-2010 Frontier (D40)
2005-2010 Pathfinder (R51)
2005-2010 Xterra (N50)
IF YOU CONFIRM
The propeller shaft u-joint (journal/journal bearings) is the source of noise and/or vibration on an Applied Vehicle.
Diagnose by evaluating the u-joint with the propeller shaft removed. If the u-joint axial play or flex effort exceed the specifications in the Electronic
Service Manual (ESM), or if a "ratchety" feel is exhibited during rotation, the u-joint (journal/journal bearings) should be replaced.
ACTION
Replace the u-joint (journal/journal bearings).
^ Refer to the applicable ESM for removal and installation instructions.
NOTE:
Do not replace the entire propeller shaft assembly if u-joint (journal/journal bearings) replacement can resolve the incident, should it occur.
PARTS INFORMATION
U-joint (journal/journal bearings) kits are now available for all Applied Vehicles. Refer to the electronic parts catalog (FAST or equivalent) to locate
the appropriate parts needed for this repair.
CLAIMS INFORMATION
Reference the current Nissan Warranty Flat Rate Manual and use the indicated FRT and appropriate coding for repairs preformed.
Labels:
Location: 5438-5450 Overhill Dr, Saginaw, MI 48603, USA

Comments

Post a Comment

Popular posts from this blog

C1140 C1140 ACTUATOR RLY

**************************** **************************** C1140 C1140 ACTUATOR RLY Description Activates or deactivates each solenoid valve according to the signals transmitted by the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1140. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Check terminal for deformation, disconnection, looseness, and so on. If any malfunction is found, repair or replace terminal. Nissan-Datsun Truck Armada 2WD V8-5.6L (VK56DE)  C CODE Page 49 4. Reconn...
Post a Comment
Read more

C1144 C1143, C1144 STEERING ANGLE SENSOR

**************************** **************************** C1144 C1143, C1144 STEERING ANGLE SENSOR Description The steering angle sensor detects the rotation amount, angular velocity and direction of the steering wheel, and transmits the data to the ABS actuator and electric unit (control unit) via CAN communication. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1143. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Disconnect steering angle sensor connector. 4. Check terminal for deformation, disconnection, looseness, and so on. ...
Post a Comment
Read more

2014 Nissan-Datsun Altima Diagrams. DTC # 10-126 Date: 101021

2014 Nissan-Datsun Altima Diagrams. DTC # 10-126 Date: 101021 Steering/Suspension - Wheel Bearing Collision Damage Classification: FA10-006 Reference: NTB10-126 Date: October 21, 2010 WHEEL BEARING COLLISION DAMAGE APPLIED VEHICLES: All Nissan SERVICE INFORMATION Impacts to wheel bearings (such as a collision or other suspension damage) may create slight indents in the bearing surfaces. These indents may not 2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 446 be visible but can cause bearing noise. NOTE: Hub/bearing replacement due to impact (collision or other suspension damage) is not a warrantable repair If a vehicle has visible wheel or suspension damage due to impact (collision or other suspension damage), it is recommended that the wheel bearing assembly be inspected as follows: 1. Remove the hub/bearing assembly from the vehicle. 2. Hold the hub/bearing assembly with both hands. 3. Rotate the hub/bearing assembly in both directions (clockwise and counterclockwise). 4. If any gr...
Post a Comment
Read more