Skip to main content

ACURA NSX (2017)

The Acura NSX, also known as the Honda NSX in some markets, is a high-performance sports car produced by the Japanese automaker Acura, a division of Honda. The 2017 Acura NSX marked the reintroduction of the NSX model after a hiatus, and it was a highly anticipated and significant release in the sports car world. Here are some key details about the 2017 Acura NSX:


**1. Performance:**
   - The 2017 Acura NSX featured a hybrid powertrain, combining a 3.5-liter twin-turbocharged V6 engine with three electric motors.
   - The total system output was around 573 horsepower and 476 lb-ft of torque.
   - It used a 9-speed dual-clutch automatic transmission and all-wheel drive (AWD) for exceptional performance.

**2. Acceleration and Speed:**
   - The 2017 NSX was known for its impressive acceleration, capable of reaching 0 to 60 mph in just around 3 seconds.
   - Its top speed was approximately 191 mph.

**3. Design:**
   - The NSX had a sleek and modern design, with a low, wide stance and distinctive styling cues.
   - It featured sharp lines and aerodynamic elements to improve downforce and stability.

**4. Interior:**
   - The interior of the 2017 NSX was driver-focused and featured high-quality materials.
   - It had a dual-screen infotainment system, sporty seats, and a clean, ergonomic layout.

**5. Handling and Dynamics:**
   - The NSX was engineered to deliver excellent handling and cornering capabilities.
   - It featured various driving modes, including a Track mode for spirited driving on the race track.

**6. Price and Availability:**
   - The 2017 Acura NSX was positioned as a high-end sports car and had a relatively high starting price.
   - It was available in limited numbers, making it a somewhat exclusive and sought-after vehicle.

**7. Technology:**
   - The 2017 NSX came equipped with advanced technology, including the Sport Hybrid SH-AWD system that provided both performance and efficiency benefits.
   - It also featured adaptive suspension and various driver assistance systems.

The 2017 Acura NSX was praised for its blend of high-performance capabilities, advanced technology, and everyday drivability. It carried on the legacy of the original NSX by offering a modern and innovative take on the sports car concept. However, it's important to note that vehicle specifications and availability can vary by region, and newer models may have been released since my last knowledge update in September 2021.
Labels:

Comments

Post a Comment

Popular posts from this blog

C1140 C1140 ACTUATOR RLY

**************************** **************************** C1140 C1140 ACTUATOR RLY Description Activates or deactivates each solenoid valve according to the signals transmitted by the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1140. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Check terminal for deformation, disconnection, looseness, and so on. If any malfunction is found, repair or replace terminal. Nissan-Datsun Truck Armada 2WD V8-5.6L (VK56DE)  C CODE Page 49 4. Reconn...
Post a Comment
Read more

C1144 C1143, C1144 STEERING ANGLE SENSOR

**************************** **************************** C1144 C1143, C1144 STEERING ANGLE SENSOR Description The steering angle sensor detects the rotation amount, angular velocity and direction of the steering wheel, and transmits the data to the ABS actuator and electric unit (control unit) via CAN communication. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1143. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Disconnect steering angle sensor connector. 4. Check terminal for deformation, disconnection, looseness, and so on. ...
Post a Comment
Read more

2014 Nissan-Datsun Altima Diagrams. DTC # 10-126 Date: 101021

2014 Nissan-Datsun Altima Diagrams. DTC # 10-126 Date: 101021 Steering/Suspension - Wheel Bearing Collision Damage Classification: FA10-006 Reference: NTB10-126 Date: October 21, 2010 WHEEL BEARING COLLISION DAMAGE APPLIED VEHICLES: All Nissan SERVICE INFORMATION Impacts to wheel bearings (such as a collision or other suspension damage) may create slight indents in the bearing surfaces. These indents may not 2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 446 be visible but can cause bearing noise. NOTE: Hub/bearing replacement due to impact (collision or other suspension damage) is not a warrantable repair If a vehicle has visible wheel or suspension damage due to impact (collision or other suspension damage), it is recommended that the wheel bearing assembly be inspected as follows: 1. Remove the hub/bearing assembly from the vehicle. 2. Hold the hub/bearing assembly with both hands. 3. Rotate the hub/bearing assembly in both directions (clockwise and counterclockwise). 4. If any gr...
Post a Comment
Read more