Skip to main content

2022 Mercedes-Benz C-Class revealed with four-cylinder power and S-Class-inspired interior

The 2022 Mercedes-Benz C-Class is here, and it certainly shouldn't surprise anyone on the outside with looks closely based on its bigger siblings. But the familiar body hides a bigger car with a new four-cylinder-only engine range and S-Class inspired interior.

At first glance, the C-Class doesn't look significantly different from before, but the changes are in the details. At the front are the scowling headlights and widened front grille that can be seen throughout the Mercedes sedan lineup from the A- to S-Classes. Similarly, the thin and wide taillights are certainly familiar as is the longer rear deck. The hood picks up dual power bulges, and the roofline has a shallower slope toward the trunk lid. The whole car is bigger, too, picking up 2.5 inches in length, an inch of wheelbase, and about half an inch of width.

Stepping inside reveals a new, distinctive environment, and one that's between half an inch to an inch larger in most areas than before. It's clearly derived from the new S-Class with the waterfall dash panels and portrait-orientation center touchscreen. It's all at a smaller scale than the S-Class, though, and the air vents are rounded squares rather than slim rectangles. The screens are standard features, with the instrument panel measuring in at 12.3 inches and the infotainment display at 11.9 inches. Among the tech features available are augmented reality camera displays, over-the-air updates, ambient lighting, multiple display themes and a fingerprint reader for accessing personal vehicle settings and information.

2022 Mercedes-Benz C-Class

Powering the C-Class is just one engine for now, a turbocharged 2.0-liter four-cylinder. It makes the same 255 horsepower as the old model, but now makes 295 pound-feet of torque, an increase of 22. It's also paired with a 48-volt starter/generator that produces 20 hp and 148 lb-ft of torque. It allows for smoother and longer starting and stopping, plus coasting and energy regeneration. Despite the increase in torque, the 0-60 mph time has dropped to 5.9 seconds from 5.7. There is once again a choice of rear- or 4Matic all-wheel drive, but the only transmission is a nine-speed automatic. It all rides on newly designed suspension that retains the multi-link independent setup like the old model.?

The new C-Class will hit dealers early next year. Pricing should be available closer to the on-sale date. We also expect that hotter AMG variants will closely follow the regular C 300's launch.

Comments

Popular posts from this blog

C1140 C1140 ACTUATOR RLY

**************************** **************************** C1140 C1140 ACTUATOR RLY Description Activates or deactivates each solenoid valve according to the signals transmitted by the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1140. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Check terminal for deformation, disconnection, looseness, and so on. If any malfunction is found, repair or replace terminal. Nissan-Datsun Truck Armada 2WD V8-5.6L (VK56DE)  C CODE Page 49 4. Reconnect

C1144 C1143, C1144 STEERING ANGLE SENSOR

**************************** **************************** C1144 C1143, C1144 STEERING ANGLE SENSOR Description The steering angle sensor detects the rotation amount, angular velocity and direction of the steering wheel, and transmits the data to the ABS actuator and electric unit (control unit) via CAN communication. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1143. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Disconnect steering angle sensor connector. 4. Check terminal for deformation, disconnection, looseness, and so on.

C1142 C1142 PRESS SENSOR

**************************** **************************** C1142 C1142 PRESS SENSOR Description The front and rear pressure sensors convert the brake fluid pressure to an electric signal and transmit it to the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1142. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. FRONT PRESSURE SENSOR 1.CONNECTOR INSPECTION 1. Turn the ignition switch OFF. 2. Disconnect the front pressure sensor connector and ABS actuator and electric unit (control unit) connector and inspect the terminals for deformation, disconnection, looseness, or damage. Is the inspection result normal? YE