Skip to main content

Update: The 2023 Nissan Z has been revealed. See it here, now. The Z is about to be reborn.

Text
Update: The 2023 Nissan Z has been revealed. See it here, now.
The Z is about to be reborn.
Bookmark this page and set your alarm, because the 2023 Nissan Z will make its online debut on Tuesday at 8:00 pm ET via YouTube from New York City.
What do we expect to see? Not a lot of surprises. The new Z was previewed by the Z Proto in 2020, and the production car should be true to that thinly veiled prototype.
Based on the prototype, the Z35-generation Z will combine designs from classic Zs from both the 1970s and 1990s. With a long hood, short deck, and traditional sports car proportions, the profile will hearken back to that of the original 240Z. The front end nods toward that first Z with round LED daytime running lights and a large rectangular grille. The rear jumps a few decades and throws some Z32 1990s vibes with horizontal LED taillights.
Inside the Z will likely feature a digital gauge cluster, large touchscreen, and three analog gauges canted towards the driver.
Modern safety equipment might finally make its way into the Z including automatic emergency braking, as Nissan makes this technology standard on most of its new vehicles.
"The powertrain will likely be a twin-turbocharged 3.0-liter V-6 from the Infiniti Q60 Red Sport 400 with about 400 horsepower and 350 lb-ft of torque. A manual transmission has been confirmed, and an automatic transmission option is likely. Updated suspension geometry will be in the cards if ""Mr. GT-R,"" Hiroshi Tamura, chief product specialist for the GT-R and NISMO, had anything to say about it."

Labels:

Comments

Post a Comment

Popular posts from this blog

C1140 C1140 ACTUATOR RLY

**************************** **************************** C1140 C1140 ACTUATOR RLY Description Activates or deactivates each solenoid valve according to the signals transmitted by the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1140. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Check terminal for deformation, disconnection, looseness, and so on. If any malfunction is found, repair or replace terminal. Nissan-Datsun Truck Armada 2WD V8-5.6L (VK56DE)  C CODE Page 49 4. Reconnect
Post a Comment
Read more

C1144 C1143, C1144 STEERING ANGLE SENSOR

**************************** **************************** C1144 C1143, C1144 STEERING ANGLE SENSOR Description The steering angle sensor detects the rotation amount, angular velocity and direction of the steering wheel, and transmits the data to the ABS actuator and electric unit (control unit) via CAN communication. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1143. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Disconnect steering angle sensor connector. 4. Check terminal for deformation, disconnection, looseness, and so on.
Post a Comment
Read more

C1142 C1142 PRESS SENSOR

**************************** **************************** C1142 C1142 PRESS SENSOR Description The front and rear pressure sensors convert the brake fluid pressure to an electric signal and transmit it to the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1142. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. FRONT PRESSURE SENSOR 1.CONNECTOR INSPECTION 1. Turn the ignition switch OFF. 2. Disconnect the front pressure sensor connector and ABS actuator and electric unit (control unit) connector and inspect the terminals for deformation, disconnection, looseness, or damage. Is the inspection result normal? YE
Post a Comment
Read more