Skip to main content

Goodyear acquires Cooper in a deal valued at $2.5 billion

NEW YORK — Two of the biggest remaining American tire companies are joining forces.

Goodyear Tire & Rubber is acquiring Cooper in a deal valued at $2.5 billion that will combine the two century-old Ohio manufacturers.

Cooper, founded in 1914, is the fifth-largest tire maker in North America based on revenue. The company has about 10,000 employees in 15 countries. In addition to the Cooper brand, it also owns Mastercraft, Roadmaster and Mickey Thompson.

For Goodyear, the bigger company, the deal will nearly double its presence in China. Cooper will get access to Goodyear's 2,500 retail locations.

The auto industry navigated a whirlwind year with the pandemic and all of the economic disruptions that accompanied it. Industry analysts see a rebound this year as vaccines are more broadly distributed, but many do not see activity reaching the levels of 2019, before the pandemic hit.

But shares in both companies have been rising sharply over the past year, particularly in the past three moths. Shares of Goodyear are up more than 21% in the past 30 days. Shares of Cooper are up almost 10% in that time.

Shareholders of Cooper Tire & Rubber, based in Findlay, Ohio, will get $41.75 in cash and about .9 shares of Goodyear common stock per share of Cooper stock. Based on Goodyear's closing price on Friday, the total consideration for Cooper shareholders is $54.36 per share, a 24% premium to Cooper's closing price on Friday. Shares in Cooper jumped 17% in premarket trading.

The deal, which has been approved by the boards of both companies, is expected to close in the second half of this year. It would give shareholders of Goodyear, based in Akron, Ohio, about 84% of the company and Cooper shareholders with the remaining 16%, the companies said.

Comments

Popular posts from this blog

C1140 C1140 ACTUATOR RLY

**************************** **************************** C1140 C1140 ACTUATOR RLY Description Activates or deactivates each solenoid valve according to the signals transmitted by the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1140. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Check terminal for deformation, disconnection, looseness, and so on. If any malfunction is found, repair or replace terminal. Nissan-Datsun Truck Armada 2WD V8-5.6L (VK56DE)  C CODE Page 49 4. Reconn...

C1144 C1143, C1144 STEERING ANGLE SENSOR

**************************** **************************** C1144 C1143, C1144 STEERING ANGLE SENSOR Description The steering angle sensor detects the rotation amount, angular velocity and direction of the steering wheel, and transmits the data to the ABS actuator and electric unit (control unit) via CAN communication. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1143. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Disconnect steering angle sensor connector. 4. Check terminal for deformation, disconnection, looseness, and so on. ...

2014 Nissan-Datsun Altima Diagrams. DTC # 10-126 Date: 101021

2014 Nissan-Datsun Altima Diagrams. DTC # 10-126 Date: 101021 Steering/Suspension - Wheel Bearing Collision Damage Classification: FA10-006 Reference: NTB10-126 Date: October 21, 2010 WHEEL BEARING COLLISION DAMAGE APPLIED VEHICLES: All Nissan SERVICE INFORMATION Impacts to wheel bearings (such as a collision or other suspension damage) may create slight indents in the bearing surfaces. These indents may not 2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 446 be visible but can cause bearing noise. NOTE: Hub/bearing replacement due to impact (collision or other suspension damage) is not a warrantable repair If a vehicle has visible wheel or suspension damage due to impact (collision or other suspension damage), it is recommended that the wheel bearing assembly be inspected as follows: 1. Remove the hub/bearing assembly from the vehicle. 2. Hold the hub/bearing assembly with both hands. 3. Rotate the hub/bearing assembly in both directions (clockwise and counterclockwise). 4. If any gr...