Skip to main content

2021 Mitsubishi Outlander PHEV gets more power and more range


There's a brand new Mitsubishi Outlander for the 2022 model year, and we've been told that a plug-in hybrid version is on the way. But before that happens, Mitsubishi has given the current Outlander PHEV an under-the-skin refresh for 2021 that brings more power, more range and a new trim level. Despite the upgrades, the starting price hasn't budged.


The Outlander PHEV gets a new 2.4-liter engine rated at 126 horsepower and 148 pound-feet of torque that replaces the previous 2.0-liter engine. A rear-axle-mounted electric motor adds 70kW of electric power, up 10kW over the old version. Add it all up and the powertrain spins out a total of 221 hp, up 31 ponies from the previous model. Updated software is said to improve "synchronization between battery and engine," which Mitsubishi says yields reductions in noise, vibration and harshness. All Outlander PHEVs are equipped with Mitsubishi's Super All-Wheel Control all-wheel drive system, and the 2021 edition gains Sport and Snow driving modes.


Along with the power boost, the Outlander PHEV's battery capacity increases from 12.0 kW/h to 13.8 kW/h. That adds two additional miles of all-electric range for a total of up to 24 miles. Mitsubishi also says the top speed under electric power with no assistance from the gasoline engine rises from 79 mph to 83 mph. According to the EPA, the 2021 Outlander PHEV scores a combined 74 MPGe while running in hybrid electric mode and 26 MPG combined once the battery is depleted. That's an improvement of one mile per gallon.


In addition to last year's SEL and GT trim levels, the 2021 Outlander PHEV gains an LE edition. The new trim adds a blacked-out grille, dark chrome dual spoke 18-inch alloy wheels and a blackout design for the front and rear bumpers. Also standard on the LE are a sunroof and upgraded audio system.


Despite the significant upgrades for 2021, the Outlander PHEV SEL starts at the same $37,490 asking price as before. The LE costs $39,190 and the top-spec GT lists at $43,190. Buyers are eligible for $6,587 in federal tax credits, which is up $751 compared to the 2020 model year due to the increase in battery capacity. The 2021 Outlander PHEV is available at Mitsubishi dealerships now.

Mitsubishi Outlander PHEV Information
Labels:

Comments

Post a Comment

Popular posts from this blog

C1140 C1140 ACTUATOR RLY

**************************** **************************** C1140 C1140 ACTUATOR RLY Description Activates or deactivates each solenoid valve according to the signals transmitted by the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1140. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Check terminal for deformation, disconnection, looseness, and so on. If any malfunction is found, repair or replace terminal. Nissan-Datsun Truck Armada 2WD V8-5.6L (VK56DE)  C CODE Page 49 4. Reconnect
Post a Comment
Read more

C1144 C1143, C1144 STEERING ANGLE SENSOR

**************************** **************************** C1144 C1143, C1144 STEERING ANGLE SENSOR Description The steering angle sensor detects the rotation amount, angular velocity and direction of the steering wheel, and transmits the data to the ABS actuator and electric unit (control unit) via CAN communication. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1143. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Disconnect steering angle sensor connector. 4. Check terminal for deformation, disconnection, looseness, and so on.
Post a Comment
Read more

C1142 C1142 PRESS SENSOR

**************************** **************************** C1142 C1142 PRESS SENSOR Description The front and rear pressure sensors convert the brake fluid pressure to an electric signal and transmit it to the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1142. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. FRONT PRESSURE SENSOR 1.CONNECTOR INSPECTION 1. Turn the ignition switch OFF. 2. Disconnect the front pressure sensor connector and ABS actuator and electric unit (control unit) connector and inspect the terminals for deformation, disconnection, looseness, or damage. Is the inspection result normal? YE
Post a Comment
Read more