Skip to main content

2021 Mercedes-Benz A35 AMG Hatch Review: Reasonably Priced AMG Goodness

Auto123 reviews the 2021 Mercedes-Benz A 35 AMG 5-door.

Mercedes, synonymous with expensive cars? Yes, of course. And yet, it’s possible to get a Silver Star-badged car that is well designed and well equipped for less than $40,000. The little A-Class can be yours for $37,800 in the 4-door version or $39,900 in the 5-door version. Both are available with a 4-cylinder engine delivering 188 hp and 221 lb-ft of torque, or in a beefier AMG version delivering 302 hp. This is the model we had occasion to test-drive for a week.

In fact, we had already had the opportunity to drive the 4-door version; this time, it was the turn of the 5-door variant. The latter is powered by the smallest AMG engine in the group, a 2.0L turbocharged 4-cylinder developing 302 hp and 295 lb-ft of torque. With this cavalry at its disposal, combined with its weight of only 1,555 kg, the little AMG A 35 guns you from 0-100 km/h in just 4.7 seconds. That's not bad for a small car that sells for $49,800.

The 4- and 5-door versions – which are priced the same by the way – represent the portal into the world of AMG models at Mercedes. But, cheaper doesn't mean cut-rate sportiness. We've had the chance to drive several AMGs, from the A 35 to the volcanic C 63s, and the A 35 and A 45 are our favorite cars, quite frankly.

Discover Shopicar! All new makes and models and all current promotions.

Comments

Popular posts from this blog

C1140 C1140 ACTUATOR RLY

**************************** **************************** C1140 C1140 ACTUATOR RLY Description Activates or deactivates each solenoid valve according to the signals transmitted by the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1140. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Check terminal for deformation, disconnection, looseness, and so on. If any malfunction is found, repair or replace terminal. Nissan-Datsun Truck Armada 2WD V8-5.6L (VK56DE)  C CODE Page 49 4. Reconnect

C1144 C1143, C1144 STEERING ANGLE SENSOR

**************************** **************************** C1144 C1143, C1144 STEERING ANGLE SENSOR Description The steering angle sensor detects the rotation amount, angular velocity and direction of the steering wheel, and transmits the data to the ABS actuator and electric unit (control unit) via CAN communication. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1143. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Disconnect steering angle sensor connector. 4. Check terminal for deformation, disconnection, looseness, and so on.

C1142 C1142 PRESS SENSOR

**************************** **************************** C1142 C1142 PRESS SENSOR Description The front and rear pressure sensors convert the brake fluid pressure to an electric signal and transmit it to the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1142. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. FRONT PRESSURE SENSOR 1.CONNECTOR INSPECTION 1. Turn the ignition switch OFF. 2. Disconnect the front pressure sensor connector and ABS actuator and electric unit (control unit) connector and inspect the terminals for deformation, disconnection, looseness, or damage. Is the inspection result normal? YE