Skip to main content

NTB09-052 CONSULT-III TCM REPROGRAMMING PROCEDURE

CONSULT-III TCM REPROGRAMMING PROCEDURE
TECHNICAL SERVICE BULLETIN
Reference Number(s): NTB09-052, Date of Issue: June 30, 2009
SERVICE INFORMATION
A complete step-by-step General Procedure for C-III TCM Reprogramming is now available
by hyperlink on the Nissan Techinfo web site.
This General Procedure is also available via hyperlink from specific C-III symptombased
Technical Service Bulletins in ASIST.
NISSAN: 2007-2009 Altima, Maxima, Sentra, Versa; 2008-2009 Rogue; 2009 Murano
CLASSIFICATION: AT09-004
APPLIED
VEHICLES:
2007-2009 Altima Sedan and Coupe (L32, CL32); 2007-2009 Maxima (A34,
A35); 2009 Murano (Z51); 2008-2009 Rogue (S35); 2007-2009 Sentra
(B16); 2007-2009 Versa (C11)
CAUTION: BEFORE STARTING REPROGRAMMING
l Connect a battery charger to the vehicle battery.
If the 12V battery voltage drops during reprogramming, the TCM
may be damaged.
l Be sure to turn OFF all vehicle electrical loads.
l If a vehicle electrical load remains ON, the TCM may be damaged.
l For TCM reprogramming, the C-III MUST be connected to the VI
using the USB cable.
l Be sure to connect the AC Adapter.
If the C-III battery voltage drops during reprogramming, the
process will be interrupted and the TCM will be damaged.
2009 Nissan Maxima S
CONSULT-III TCM REPROGRAMMING PROCEDURE
2020年3月30日 11:45:58 Page 1 © 2011 Mitchell Repair Information 46:02 Company, LLC.

Labels:

Comments

Post a Comment

Popular posts from this blog

C1140 C1140 ACTUATOR RLY

**************************** **************************** C1140 C1140 ACTUATOR RLY Description Activates or deactivates each solenoid valve according to the signals transmitted by the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1140. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Check terminal for deformation, disconnection, looseness, and so on. If any malfunction is found, repair or replace terminal. Nissan-Datsun Truck Armada 2WD V8-5.6L (VK56DE)  C CODE Page 49 4. Reconnect
Post a Comment
Read more

C1144 C1143, C1144 STEERING ANGLE SENSOR

**************************** **************************** C1144 C1143, C1144 STEERING ANGLE SENSOR Description The steering angle sensor detects the rotation amount, angular velocity and direction of the steering wheel, and transmits the data to the ABS actuator and electric unit (control unit) via CAN communication. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1143. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Disconnect steering angle sensor connector. 4. Check terminal for deformation, disconnection, looseness, and so on.
Post a Comment
Read more

C1142 C1142 PRESS SENSOR

**************************** **************************** C1142 C1142 PRESS SENSOR Description The front and rear pressure sensors convert the brake fluid pressure to an electric signal and transmit it to the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1142. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. FRONT PRESSURE SENSOR 1.CONNECTOR INSPECTION 1. Turn the ignition switch OFF. 2. Disconnect the front pressure sensor connector and ABS actuator and electric unit (control unit) connector and inspect the terminals for deformation, disconnection, looseness, or damage. Is the inspection result normal? YE
Post a Comment
Read more