SRS PRECAUTIONS DURING SERVICE
TECHNICAL SERVICE BULLETIN
Reference Number(s): NTB08-055c, Date of Issue: January 27, 2014
Superceded Bulletin(s): NTB08-055b, Date of Issue: October 9, 2008
APPLIED VEHICLES
All Nissan Models with SRS Systems
SERVICE INFORMATION
Information necessary to service the Supplemental Restraint System (SRS) safely is
included in the "RESTRAINTS" section of the Electronic Service Manual (ESM) for each
vehicle.
Improper maintenance, including incorrect removal and installation of the SRS, can lead
to a serious injury or death caused by unintentional activation of the SRS .
In addition to the cautions and warnings in the ESM, the following provides additional
safety precautions:
l Do not use power tools (air or electric) when working near the diagnosis sensor
unit (mounted on the vehicle floor) with the ignition switch ON. For example, when
removing or installing a front seat or center console, or when working underneath
the vehicle near the diagnosis sensor unit.
l Use of power tools (air or electric) can vibrate the vehicle floor. If the battery
cables are connected and the ignition switch is ON, these vibrations can be
detected by the diagnosis sensor unit and activate the SRS.
l Do not use a hammer (or any similar object) when working near the side air bag
(satellite) sensor (mounted on the B-pillar) with the ignition switch ON. For
example, when adjusting the front door striker with a hammer.
l Use of a hammer (or similar object) near the side air bag (satellite) sensor can
vibrate the B-pillar. If the battery cables are connected and the ignition switch
is ON, these vibrations can be detected by the diagnosis sensor unit and activate
the SRS.
NISSAN: All Nissan
CLASSIFICATION: RS08-004c
IMPORTANT: Turn the ignition switch OFF; disconnect both battery terminals; and wait at
least 3 minutes before performing any service on the SRS.
2009 Nissan Maxima S
SRS PRECAUTIONS DURING SERVICE
2020年3月29日 22:12:32 Page 1 © 2011 Mitchell Repair Information 35 Company, LLC.
TECHNICAL SERVICE BULLETIN
Reference Number(s): NTB08-055c, Date of Issue: January 27, 2014
Superceded Bulletin(s): NTB08-055b, Date of Issue: October 9, 2008
APPLIED VEHICLES
All Nissan Models with SRS Systems
SERVICE INFORMATION
Information necessary to service the Supplemental Restraint System (SRS) safely is
included in the "RESTRAINTS" section of the Electronic Service Manual (ESM) for each
vehicle.
Improper maintenance, including incorrect removal and installation of the SRS, can lead
to a serious injury or death caused by unintentional activation of the SRS .
In addition to the cautions and warnings in the ESM, the following provides additional
safety precautions:
l Do not use power tools (air or electric) when working near the diagnosis sensor
unit (mounted on the vehicle floor) with the ignition switch ON. For example, when
removing or installing a front seat or center console, or when working underneath
the vehicle near the diagnosis sensor unit.
l Use of power tools (air or electric) can vibrate the vehicle floor. If the battery
cables are connected and the ignition switch is ON, these vibrations can be
detected by the diagnosis sensor unit and activate the SRS.
l Do not use a hammer (or any similar object) when working near the side air bag
(satellite) sensor (mounted on the B-pillar) with the ignition switch ON. For
example, when adjusting the front door striker with a hammer.
l Use of a hammer (or similar object) near the side air bag (satellite) sensor can
vibrate the B-pillar. If the battery cables are connected and the ignition switch
is ON, these vibrations can be detected by the diagnosis sensor unit and activate
the SRS.
NISSAN: All Nissan
CLASSIFICATION: RS08-004c
IMPORTANT: Turn the ignition switch OFF; disconnect both battery terminals; and wait at
least 3 minutes before performing any service on the SRS.
2009 Nissan Maxima S
SRS PRECAUTIONS DURING SERVICE
2020年3月29日 22:12:32 Page 1 © 2011 Mitchell Repair Information 35 Company, LLC.
