NTB04-054 WHEEL ALIGNMENT INFORMATION
NTB04-054C WHEEL ALIGNMENT INFORMATION
NTB04-054D WHEEL ALIGNMENT INFORMATION
WHEEL ALIGNMENT INFORMATION
TECHNICAL SERVICE BULLETIN
Reference Number(s): NTB04-054d, Date of Issue: November 21, 2011
Superceded Bulletin(s): NTB04-054c, Date of Issue: April 6, 2011
REVISION HISTORY
This bulletin has been amended. The "Operations Performed Report" was added. Discard
previous versions of this bulletin.
SERVICE INFORMATION
l When performing a wheel alignment it is important that you read and follow all of
the instructions supplied with your alignment equipment.
l The information in this bulletin is not intended to be complete wheel alignment
instructions.
l Use the information in this bulletin as a supplement to the instructions for your
equipment.
GENERAL INFORMATION AND RECOMMENDATIONS
1. Four-Wheel Thrust Alignment should always be performed.
l This type of alignment is recommended for all Nissan vehicles.
l The four-wheel thrust process ensures that the vehicle is properly aligned,
and helps ensure proper "centering" of the steering wheel.
2. Use the right alignment machine.
l You must use a quality alignment machine that will give accurate results when
performing alignment checks.
l Refer to the Nissan TECH-MATE Service Equipment Catalog for recommended
alignment equipment.
l The alignment rack itself should be capable of accepting any Nissan vehicle.
l The rack should be checked to ensure that it is level.
3. Make sure the alignment machine is properly calibrated.
l Your alignment equipment should be regularly calibrated in order to give
accurate readings.
l If any instrument that is part of the alignment machine is dropped or
damaged, calibration should be checked immediately.
l Check with the manufacturer of your specific equipment for their recommended
service/calibration schedule.
NISSAN: Nissan
CLASSIFICATION: WT04-004D
APPLIED VEHICLES: All Nissan - except GT-R
NOTE: In order to properly document any warranty alignment claim, the
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 1 © 2011 Mitchell Repair Information 12 Company, LLC.
l A copy of the alignment machine printout showing the BEFORE and AFTER
alignment readings.
ALSO:
l A copy of the yearly alignment machine calibration certification must be held
on file in the Service Dept.
l When finished, complete the Operations Performed Report and attach it to the
repair order.
4. Make sure the "turn plates" and "slide plates" are in good working order:
l The surface of the front turn plates must be level with (the same height as)
the rack surface.
If height is not the same; have the equipment repaired before performing any
alignments.
following item MUST be attached to the Repair Order:
IMPORTANT: If you do not attach the above item to the Repair Order, the claim may
be denied (rejected or charged back).
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 2 © 2011 Mitchell Repair Information Company, LLC.
l Make sure the front turn plates:
l Do not wobble (no up/down movement).
l Operate (slide and turn) smoothly in all directions.
If there is any issue with the turn plate operation - have the equipment
repaired before performing any alignments.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 3 © 2011 Mitchell Repair Information Company, LLC.
l Make sure the rear slide plates:
l Do not wobble (no up/down movement).
l Operate (slide) smoothly in all directions.
If there is any issue with the slide plate operation - have the equipment repaired
before performing any alignments.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 4 © 2011 Mitchell Repair Information Company, LLC.
5. Make sure the lock pins for the front "turn plates" and rear "slide plates" are in
place.
THE ALIGNMENT PROCESS
1. Make sure the vehicle is straight on the alignment rack.
l Vehicle must be straight (in line) with the alignment rack before entering
the rack as shown in Figure 4.
l Do not straighten the vehicle while on the rack (see Figure 5).
l If the vehicle needs to be straightened, exit the alignment rack, straighten
the vehicle and then re-enter the rack.
l Once the vehicle is straight on the rack, do not turn/center the steering
wheel-keep the front wheels straight.
NOTE: Lock pins should remain in place until caster sweep.
IMPORTANT: Use only the alignment specifications listed in the appropriate Service
Manual when adjusting the alignment.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 5 © 2011 Mitchell Repair Information Company, LLC.
Figure 4
Figure 5
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 6 © 2011 Mitchell Repair Information Company, LLC.
2. Position vehicle on the front turn plates as follows:
l Stop vehicle just behind the turn plates.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 7 © 2011 Mitchell Repair Information Company, LLC.
l Center the turn plates to the tires.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 8 © 2011 Mitchell Repair Information Company, LLC.
l Move the vehicle onto the turn plates by turning/pushing the rear wheel.
DO NOT push/pull on the vehicle body.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 9 © 2011 Mitchell Repair Information Company, LLC.
l Center the front wheels on the turn plates.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 10 © 2011 Mitchell Repair Information Company, LLC.
l Chock the left rear wheel.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 11 © 2011 Mitchell Repair Information Company, LLC.
Preliminary Checks:
3. Perform pre-alignment checks.
l Tire condition (wear, partial wear, flaws, etc.)
l Road wheel condition (damage and deformation)
l Tire pressure
l Inspect for visible damage to any suspension components
l Wheel bearing axial play
l Ball joints of suspension arms
l Shock absorber operation and visual check for oil leakage
l Condition of axle and suspension (check for bushing cracks and slack)
l Vehicle weight
l Empty - no cargo, luggage, or passengers
l Fuel level is full
l Engine coolant and lubricating oils at specified levels
l Spare tire, jack, hand tools, and floor mats in designated positions
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 12 © 2011 Mitchell Repair Information Company, LLC.
4. Check the target mounts.
l If there is any visual damage (bent, worn, cracked, etc), have the equipment
repaired before performing any alignments.
l Make sure the target mounts are properly adjusted and configured (see Figure
below).
Figure 11
5. Make sure the targets are mounted correctly.
l Mount the top claws first.
NOTE: Refer to the appropriate Service Manual for information about any
of the above checks and inspections.
NOTE: The target mount example shown in the Figure below is for Hunter
"camera type" alignment machines. Follow the operation manual for
your specific equipment.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 13 © 2011 Mitchell Repair Information Company, LLC.
l Claws must be flush against the wheel as shown in Figure below.
l Target must be flush against the center support as shown in Figure below.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 14 © 2011 Mitchell Repair Information Company, LLC.
l Make sure the targets are positioned with the arrow UP or level.
IMPORTANT: Once you have set the target position, DO NOT reset it at anytime
during the alignment process.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 15 © 2011 Mitchell Repair Information Company, LLC.
6. Begin the alignment procedure.
l Follow all of the instructions for your particular equipment.
l Refer to the Service Manual for alignment specifications.
If your equipment requires "rolling compensation", follow these additional
tips:
l DO NOT push or pull on the vehicle body.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:09 Page 16 © 2011 Mitchell Repair Information Company, LLC.
When performing "caster sweep", follow these tips:
l Apply the brakes as shown.
l Start the engine to allow brake boost.
l Turn the engine OFF,
IMPORTANT: After performing "rolling compensation", DO NOT reset the target
position .
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:09 Page 17 © 2011 Mitchell Repair Information Company, LLC.
l Remove all lock pins-front "turn plates" and rear "slide plates".
l Make sure the bridge plate will not interfere with movement of the turn
plate.
Put the bridge plate in the down position.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:09 Page 18 © 2011 Mitchell Repair Information Company, LLC.
l Perform caster sweep by turning the steering wheel from outside the vehicle.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:09 Page 19 © 2011 Mitchell Repair Information Company, LLC.
l DO NOT push/pull on the tire to perform the caster sweep.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:09 Page 20 © 2011 Mitchell Repair Information Company, LLC.
7. Make sure the steering wheel is centered when performing toe-in measurements and
adjustments.
l There is no need to lock the steering wheel. The WinToe? system is not
affected by steering system movement during the adjustment process.
l Bumping the tire or re-centering the steering wheel when adjusting "near
frozen" tie rods is not necessary. This makes the adjustment process faster
and easier.
l WinToe? eliminates the effect of lash in the steering system.
If you are using a John Bean alignment machine equipped with EZ Toe:
l There is no need to lock the steering wheel. The EZ Toe system is not
affected by steering system movement during the adjustment process.
l This software routine is an improved method of setting front toe, making it
easier to obtain a centered steering wheel.
NOTE: If you are using a Hunter alignment machine equipped with the
WinToe? Alignment Adjustment System:
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:09 Page 21 © 2011 Mitchell Repair Information Company, LLC.
l With EZ Toe, it is possible to adjust toe with the steering wheel turned at
any angle left or right. This is helpful when setting toe on engine wall
mounted rack and pinion units.
After you have checked and adjusted vehicle alignment
8. Print the BEFORE and AFTER measurements and attach them to the Repair Order.
9. Road test the vehicle to make sure the steering wheel is "centered" when driving
on a straight flat road.
10. When finished, complete the Operations Performed Report on the next page and
attach it to the repair order.
WARRANTY CLAIM INFORMATION
In order to properly document any warranty alignment claim, the following item MUST be
attached to the Repair Order:
l A copy of the alignment machine printout showing the BEFORE and AFTER alignment
readings.
ALSO:
l A copy of the yearly alignment machine calibration certification must be held on
file in the Service Dept.
l When finished, complete the Operations Performed Report (see page 14) and attach
it to the repair order.
IMPORTANT: If during the alignment process the vehicle was lifted off of the rack;
after lowering, make sure to jounce (bounce) the vehicle before
confirming adjustments are correct.
IMPORTANT: If you do not attach the above item to the Repair Order, the claim may be
denied (rejected or charged back).
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:09 Page 22 © 2011 Mitchell Repair Information Company, LLC.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:09 Page 23 © 2011 Mitchell Repair Information Company, LLC.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:09 Page 24 © 2011 Mitchell Repair Information Company, LLC.
NTB04-054C WHEEL ALIGNMENT INFORMATION
NTB04-054D WHEEL ALIGNMENT INFORMATION
WHEEL ALIGNMENT INFORMATION
TECHNICAL SERVICE BULLETIN
Reference Number(s): NTB04-054d, Date of Issue: November 21, 2011
Superceded Bulletin(s): NTB04-054c, Date of Issue: April 6, 2011
REVISION HISTORY
This bulletin has been amended. The "Operations Performed Report" was added. Discard
previous versions of this bulletin.
SERVICE INFORMATION
l When performing a wheel alignment it is important that you read and follow all of
the instructions supplied with your alignment equipment.
l The information in this bulletin is not intended to be complete wheel alignment
instructions.
l Use the information in this bulletin as a supplement to the instructions for your
equipment.
GENERAL INFORMATION AND RECOMMENDATIONS
1. Four-Wheel Thrust Alignment should always be performed.
l This type of alignment is recommended for all Nissan vehicles.
l The four-wheel thrust process ensures that the vehicle is properly aligned,
and helps ensure proper "centering" of the steering wheel.
2. Use the right alignment machine.
l You must use a quality alignment machine that will give accurate results when
performing alignment checks.
l Refer to the Nissan TECH-MATE Service Equipment Catalog for recommended
alignment equipment.
l The alignment rack itself should be capable of accepting any Nissan vehicle.
l The rack should be checked to ensure that it is level.
3. Make sure the alignment machine is properly calibrated.
l Your alignment equipment should be regularly calibrated in order to give
accurate readings.
l If any instrument that is part of the alignment machine is dropped or
damaged, calibration should be checked immediately.
l Check with the manufacturer of your specific equipment for their recommended
service/calibration schedule.
NISSAN: Nissan
CLASSIFICATION: WT04-004D
APPLIED VEHICLES: All Nissan - except GT-R
NOTE: In order to properly document any warranty alignment claim, the
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 1 © 2011 Mitchell Repair Information 12 Company, LLC.
l A copy of the alignment machine printout showing the BEFORE and AFTER
alignment readings.
ALSO:
l A copy of the yearly alignment machine calibration certification must be held
on file in the Service Dept.
l When finished, complete the Operations Performed Report and attach it to the
repair order.
4. Make sure the "turn plates" and "slide plates" are in good working order:
l The surface of the front turn plates must be level with (the same height as)
the rack surface.
If height is not the same; have the equipment repaired before performing any
alignments.
following item MUST be attached to the Repair Order:
IMPORTANT: If you do not attach the above item to the Repair Order, the claim may
be denied (rejected or charged back).
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 2 © 2011 Mitchell Repair Information Company, LLC.
l Make sure the front turn plates:
l Do not wobble (no up/down movement).
l Operate (slide and turn) smoothly in all directions.
If there is any issue with the turn plate operation - have the equipment
repaired before performing any alignments.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 3 © 2011 Mitchell Repair Information Company, LLC.
l Make sure the rear slide plates:
l Do not wobble (no up/down movement).
l Operate (slide) smoothly in all directions.
If there is any issue with the slide plate operation - have the equipment repaired
before performing any alignments.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 4 © 2011 Mitchell Repair Information Company, LLC.
5. Make sure the lock pins for the front "turn plates" and rear "slide plates" are in
place.
THE ALIGNMENT PROCESS
1. Make sure the vehicle is straight on the alignment rack.
l Vehicle must be straight (in line) with the alignment rack before entering
the rack as shown in Figure 4.
l Do not straighten the vehicle while on the rack (see Figure 5).
l If the vehicle needs to be straightened, exit the alignment rack, straighten
the vehicle and then re-enter the rack.
l Once the vehicle is straight on the rack, do not turn/center the steering
wheel-keep the front wheels straight.
NOTE: Lock pins should remain in place until caster sweep.
IMPORTANT: Use only the alignment specifications listed in the appropriate Service
Manual when adjusting the alignment.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 5 © 2011 Mitchell Repair Information Company, LLC.
Figure 4
Figure 5
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 6 © 2011 Mitchell Repair Information Company, LLC.
2. Position vehicle on the front turn plates as follows:
l Stop vehicle just behind the turn plates.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 7 © 2011 Mitchell Repair Information Company, LLC.
l Center the turn plates to the tires.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 8 © 2011 Mitchell Repair Information Company, LLC.
l Move the vehicle onto the turn plates by turning/pushing the rear wheel.
DO NOT push/pull on the vehicle body.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 9 © 2011 Mitchell Repair Information Company, LLC.
l Center the front wheels on the turn plates.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 10 © 2011 Mitchell Repair Information Company, LLC.
l Chock the left rear wheel.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 11 © 2011 Mitchell Repair Information Company, LLC.
Preliminary Checks:
3. Perform pre-alignment checks.
l Tire condition (wear, partial wear, flaws, etc.)
l Road wheel condition (damage and deformation)
l Tire pressure
l Inspect for visible damage to any suspension components
l Wheel bearing axial play
l Ball joints of suspension arms
l Shock absorber operation and visual check for oil leakage
l Condition of axle and suspension (check for bushing cracks and slack)
l Vehicle weight
l Empty - no cargo, luggage, or passengers
l Fuel level is full
l Engine coolant and lubricating oils at specified levels
l Spare tire, jack, hand tools, and floor mats in designated positions
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 12 © 2011 Mitchell Repair Information Company, LLC.
4. Check the target mounts.
l If there is any visual damage (bent, worn, cracked, etc), have the equipment
repaired before performing any alignments.
l Make sure the target mounts are properly adjusted and configured (see Figure
below).
Figure 11
5. Make sure the targets are mounted correctly.
l Mount the top claws first.
NOTE: Refer to the appropriate Service Manual for information about any
of the above checks and inspections.
NOTE: The target mount example shown in the Figure below is for Hunter
"camera type" alignment machines. Follow the operation manual for
your specific equipment.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 13 © 2011 Mitchell Repair Information Company, LLC.
l Claws must be flush against the wheel as shown in Figure below.
l Target must be flush against the center support as shown in Figure below.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 14 © 2011 Mitchell Repair Information Company, LLC.
l Make sure the targets are positioned with the arrow UP or level.
IMPORTANT: Once you have set the target position, DO NOT reset it at anytime
during the alignment process.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:08 Page 15 © 2011 Mitchell Repair Information Company, LLC.
6. Begin the alignment procedure.
l Follow all of the instructions for your particular equipment.
l Refer to the Service Manual for alignment specifications.
If your equipment requires "rolling compensation", follow these additional
tips:
l DO NOT push or pull on the vehicle body.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:09 Page 16 © 2011 Mitchell Repair Information Company, LLC.
When performing "caster sweep", follow these tips:
l Apply the brakes as shown.
l Start the engine to allow brake boost.
l Turn the engine OFF,
IMPORTANT: After performing "rolling compensation", DO NOT reset the target
position .
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:09 Page 17 © 2011 Mitchell Repair Information Company, LLC.
l Remove all lock pins-front "turn plates" and rear "slide plates".
l Make sure the bridge plate will not interfere with movement of the turn
plate.
Put the bridge plate in the down position.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:09 Page 18 © 2011 Mitchell Repair Information Company, LLC.
l Perform caster sweep by turning the steering wheel from outside the vehicle.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:09 Page 19 © 2011 Mitchell Repair Information Company, LLC.
l DO NOT push/pull on the tire to perform the caster sweep.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:09 Page 20 © 2011 Mitchell Repair Information Company, LLC.
7. Make sure the steering wheel is centered when performing toe-in measurements and
adjustments.
l There is no need to lock the steering wheel. The WinToe? system is not
affected by steering system movement during the adjustment process.
l Bumping the tire or re-centering the steering wheel when adjusting "near
frozen" tie rods is not necessary. This makes the adjustment process faster
and easier.
l WinToe? eliminates the effect of lash in the steering system.
If you are using a John Bean alignment machine equipped with EZ Toe:
l There is no need to lock the steering wheel. The EZ Toe system is not
affected by steering system movement during the adjustment process.
l This software routine is an improved method of setting front toe, making it
easier to obtain a centered steering wheel.
NOTE: If you are using a Hunter alignment machine equipped with the
WinToe? Alignment Adjustment System:
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:09 Page 21 © 2011 Mitchell Repair Information Company, LLC.
l With EZ Toe, it is possible to adjust toe with the steering wheel turned at
any angle left or right. This is helpful when setting toe on engine wall
mounted rack and pinion units.
After you have checked and adjusted vehicle alignment
8. Print the BEFORE and AFTER measurements and attach them to the Repair Order.
9. Road test the vehicle to make sure the steering wheel is "centered" when driving
on a straight flat road.
10. When finished, complete the Operations Performed Report on the next page and
attach it to the repair order.
WARRANTY CLAIM INFORMATION
In order to properly document any warranty alignment claim, the following item MUST be
attached to the Repair Order:
l A copy of the alignment machine printout showing the BEFORE and AFTER alignment
readings.
ALSO:
l A copy of the yearly alignment machine calibration certification must be held on
file in the Service Dept.
l When finished, complete the Operations Performed Report (see page 14) and attach
it to the repair order.
IMPORTANT: If during the alignment process the vehicle was lifted off of the rack;
after lowering, make sure to jounce (bounce) the vehicle before
confirming adjustments are correct.
IMPORTANT: If you do not attach the above item to the Repair Order, the claim may be
denied (rejected or charged back).
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:09 Page 22 © 2011 Mitchell Repair Information Company, LLC.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:09 Page 23 © 2011 Mitchell Repair Information Company, LLC.
2009 Nissan Maxima S
WHEEL ALIGNMENT INFORMATION
2020年3月28日 15:47:09 Page 24 © 2011 Mitchell Repair Information Company, LLC.
