Skip to main content

2014 Nissan-Datsun Altima Diagrams. DTC # 09-040A Date: 100514

2014 Nissan-Datsun Altima Diagrams. DTC # 09-040A Date: 100514



Cooling System - Long Life Coolant Information



Classification: EM09-001A



Reference: NTB09-040A



Date: May 14, 2010



NEW BLUE NISSAN LONG LIFE ANTIFREEZE/COOLANT



This bulletin has been amended. The Service Information has been updated. Please discard previous versions of this bulletin.



SERVICE INFORMATION



In calendar year 2009, Nissan began filling some vehicles at the factory with a NEW Nissan Long Life Antifreeze/Coolant (LLC) that is blue in



color.



NOTE: LLC = Long Life Antifreeze/Coolant



The transition to this new Blue LLC continued though MY 2010. Beginning with MY 2011, all Nissan vehicles are filled at the factory with the Blue



LLC.



^ MY 2009 and 2010: Some vehicles are filled at the factory with Blue LLC.



^ MY 2011: All vehicles are filled at the factory with Blue LLC.



Blue LLC is designed to have a service life of 7 years/105,000 miles for the factory fill, and 5 years/75,000 miles for subsequent replacement fills.



Nissan Blue Super LLC is available through the Nissan Direct Ship Chemical Care Product Program, Website order link via dealer portal



www.NNAnet.com or order direct www.NissanChemicals.com.



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 418



^ Blue LLC one gallon pre-diluted:



P/N 999MP - LP25500P



> The one gallon containers are pre-diluted with 50% antifreeze and 50% distilled water.



> Do not add additional water when using pre-diluted Blue LLC.



^ Blue LLC one quart concentrate:



P/N 999MP - L255QTP



> The one quart concentrate containers are intended for extreme cold weather application.



> Use the concentrate without mixing (do not add water).



> Add directly to the cooling system in specific amounts as directed on the container label.



Additional Information for using Blue LLC



Blue LLC and Green-colored Nissan LLC (P/N 999MP-AF000P) are compatible with each other:



^ Blue can be mixed/added with Green



^ Green can be mixed/added with Blue



CAUTION:



^ Adding Green LLC to Blue LLC will reduce/shorten the life expectancy of the Blue LLC to that of the Green LLC (4 years / 60,000 miles).



^ LLC must always be used with demineralized or distilled water, otherwise the life expectancy of the LLC (Blue or Green) will be degraded and



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 419



cooling system damage may occur.

Labels:

Comments

Post a Comment

Popular posts from this blog

C1140 C1140 ACTUATOR RLY

**************************** **************************** C1140 C1140 ACTUATOR RLY Description Activates or deactivates each solenoid valve according to the signals transmitted by the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1140. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Check terminal for deformation, disconnection, looseness, and so on. If any malfunction is found, repair or replace terminal. Nissan-Datsun Truck Armada 2WD V8-5.6L (VK56DE)  C CODE Page 49 4. Reconnect
Post a Comment
Read more

C1144 C1143, C1144 STEERING ANGLE SENSOR

**************************** **************************** C1144 C1143, C1144 STEERING ANGLE SENSOR Description The steering angle sensor detects the rotation amount, angular velocity and direction of the steering wheel, and transmits the data to the ABS actuator and electric unit (control unit) via CAN communication. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1143. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Disconnect steering angle sensor connector. 4. Check terminal for deformation, disconnection, looseness, and so on.
Post a Comment
Read more

C1142 C1142 PRESS SENSOR

**************************** **************************** C1142 C1142 PRESS SENSOR Description The front and rear pressure sensors convert the brake fluid pressure to an electric signal and transmit it to the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1142. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. FRONT PRESSURE SENSOR 1.CONNECTOR INSPECTION 1. Turn the ignition switch OFF. 2. Disconnect the front pressure sensor connector and ABS actuator and electric unit (control unit) connector and inspect the terminals for deformation, disconnection, looseness, or damage. Is the inspection result normal? YE
Post a Comment
Read more