Nissan-Datsun Truck Armada 2WD V8-5.6L (VK56DE) A L L Diagnostic Trouble Codes ( DTC ): B Code Charts Page 126

****************************
****************************

Nissan-Datsun Truck Armada 2WD V8-5.6L (VK56DE) A L L Diagnostic Trouble Codes ( DTC ): B Code Charts  Page 126
For initialization, refer to "CONSULT-III Operation Manual".
NO - GO TO 3
3.CHECK POWER SUPPLY FOR NATS ANTENNA AMP.
1. Turn ignition switch ON.
2. Check voltage between NATS antenna amp. connector M21 terminal 1 and ground.
1 - Ground : Battery voltage
Is the inspection result normal?
YES - GO TO 4
NO - Repair or replace fuse or harness.
4.CHECK NATS ANTENNA AMP. GROUND LINE CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect NATS antenna amp. connector.
3. Check continuity between NATS antenna amp. connector M21 terminal 3 and ground.
3 - Ground : Continuity should exist.
Is the inspection result normal?
YES - GO TO 5
NO - Repair or replace harness.
NOTE:
If harness is OK, replace BCM, See: Body and Frame/Body Control Systems/Body Control Module/Service and Repair. Perform initialization
with
CONSULT-III. For initialization, refer to "CONSULT-III
Operation Manual".
5.CHECK NATS ANTENNA AMP. SIGNAL LINE- 1
1. Connect NATS antenna amp. connector.
2. Turn ignition switch ON.
3. Check voltage between NATS antenna amp. connector M21 terminal 2 and ground with analog tester.