****************************
****************************Nissan Armada Technical Service Bulletin # 10-081 Date: 100625
Brakes - Front Brake Pad Service Supplement
Classification: BR10-005
Reference: NTB10-081
Date: June 25, 2010
2004 - 2010 TITAN AND ARMADA; FRONT BRAKE PAD SERVICE
APPLIED VEHICLES:
2004 - 2010 Titan (A60)
2004 - 2010 Armada (TA60)
IF YOU CONFIRM
Front brake service is needed that will require the removal of the front brake caliper cylinder body or brake pads,
ACTION:
Follow the Service Procedure in this bulletin as a supplement to the brake service.
NOTE:
The supplemental items in the Service Procedure of this bulletin supersede any previous detailed brake pad removal procedures.
IMPORTANT:
The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing this repair.
SERVICE PROCEDURE
1. Partially drain the brake fluid.
^ Refer to section BR (DRAIN and REFILL) in the Service Manual.
2. Remove the front wheels.
^ Refer to the Service Manual as needed for front wheel removal.
Nissan Armada 2wd v8 5.6L Parts Service 277
3. Remove the upper and lower sliding pin bolts (see Figure 1).
4. Support / hang the caliper cylinder body with a wire or other suitable support (see Figure 2).
^ Make sure the brake hose is not stretched or stressed.
^ Make sure the sensor harness bracket will not be bent by weight of the caliper cylinder body.
5. Refer to the BR Section of the Service Manual as needed to complete the brake service.
Nissan Armada 2wd v8 5.6L Parts Service 278
IMPORTANT:
If you remove the brake pad retainers from the torque member, lift them in the direction indicated by the arrow (see Figure 3) so retainers will not
deform.
****************************Nissan Armada Technical Service Bulletin # 10-081 Date: 100625
Brakes - Front Brake Pad Service Supplement
Classification: BR10-005
Reference: NTB10-081
Date: June 25, 2010
2004 - 2010 TITAN AND ARMADA; FRONT BRAKE PAD SERVICE
APPLIED VEHICLES:
2004 - 2010 Titan (A60)
2004 - 2010 Armada (TA60)
IF YOU CONFIRM
Front brake service is needed that will require the removal of the front brake caliper cylinder body or brake pads,
ACTION:
Follow the Service Procedure in this bulletin as a supplement to the brake service.
NOTE:
The supplemental items in the Service Procedure of this bulletin supersede any previous detailed brake pad removal procedures.
IMPORTANT:
The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing this repair.
SERVICE PROCEDURE
1. Partially drain the brake fluid.
^ Refer to section BR (DRAIN and REFILL) in the Service Manual.
2. Remove the front wheels.
^ Refer to the Service Manual as needed for front wheel removal.
Nissan Armada 2wd v8 5.6L Parts Service 277
3. Remove the upper and lower sliding pin bolts (see Figure 1).
4. Support / hang the caliper cylinder body with a wire or other suitable support (see Figure 2).
^ Make sure the brake hose is not stretched or stressed.
^ Make sure the sensor harness bracket will not be bent by weight of the caliper cylinder body.
5. Refer to the BR Section of the Service Manual as needed to complete the brake service.
Nissan Armada 2wd v8 5.6L Parts Service 278
IMPORTANT:
If you remove the brake pad retainers from the torque member, lift them in the direction indicated by the arrow (see Figure 3) so retainers will not
deform.
