****************************
****************************
Nissan Armada Technical Service Bulletin # 10-104 Date: 100902
Engine - Oil Leak Behind Alternator
Classification: EM10-007
Reference: NTB10-104
Date: September 2, 2010
2004 - 2010 TITAN AND ARMADA;
ENGINE OIL LEAK AT RIGHT SIDE BLOCK BALL PLUG
APPLIED VEHICLES:
2004 - 2010 Titan (A60)
2004 - 2010 Armada (TA60)
Nissan Armada 2wd v8 5.6L Parts Service 319
IF YOU CONFIRM:
An oil leak at the right side block ball plug behind the alternator,
ACTION:
Use a punch to seat the block ball plug in the hole (refer to the service procedure).
NOTE:
Do not replace the engine block for this incident if it should occur.
CLAIMS INFORMATION
IMPORTANT:
The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing this repair.
SERVICE PROCEDURE
1. Obtain a drift punch with a maximum diameter of 7.5 mm (1/4 inch).
Nissan Armada 2wd v8 5.6L Parts Service 320
2. Use the punch and a hammer to tap the block ball plug further into the hole until it fully seats (see Figures 3 and 4).
^ Move the ball plug further into the hole until it "bottoms out" (fully seats).
^ You will feel the ball become solid when it "bottoms out" (fully seats) as shown in Figure 4.
3. Run the engine and make sure the oil leak is fixed.
****************************
Nissan Armada Technical Service Bulletin # 10-104 Date: 100902
Engine - Oil Leak Behind Alternator
Classification: EM10-007
Reference: NTB10-104
Date: September 2, 2010
2004 - 2010 TITAN AND ARMADA;
ENGINE OIL LEAK AT RIGHT SIDE BLOCK BALL PLUG
APPLIED VEHICLES:
2004 - 2010 Titan (A60)
2004 - 2010 Armada (TA60)
Nissan Armada 2wd v8 5.6L Parts Service 319
IF YOU CONFIRM:
An oil leak at the right side block ball plug behind the alternator,
ACTION:
Use a punch to seat the block ball plug in the hole (refer to the service procedure).
NOTE:
Do not replace the engine block for this incident if it should occur.
CLAIMS INFORMATION
IMPORTANT:
The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing this repair.
SERVICE PROCEDURE
1. Obtain a drift punch with a maximum diameter of 7.5 mm (1/4 inch).
Nissan Armada 2wd v8 5.6L Parts Service 320
2. Use the punch and a hammer to tap the block ball plug further into the hole until it fully seats (see Figures 3 and 4).
^ Move the ball plug further into the hole until it "bottoms out" (fully seats).
^ You will feel the ball become solid when it "bottoms out" (fully seats) as shown in Figure 4.
3. Run the engine and make sure the oil leak is fixed.
