Skip to main content

Porsche says its synthetic fuel will make internal combustion as clean as EVs

With the automotive world rapidly heading towards electrification and governments banning the sale of internal combustion engine cars in the coming decades, it would seem that the days of traditional cars are numbered. However, a few automakers, including Porsche, Audi and Mazda, have been investing in synthetic fuels that could be just as clean as electric vehicles.

In a recent interview with Evo magazine, Porsche VP of Motorsport and GT cars, Dr. Frank Walliser, says that synthetic fuels, also called eFuels, can reduce the carbon dioxide emissions of existing ICE cars by as much as 85 percent. And, he says, when you account for the wheel-to-well impact of manufacturing the EV, it's a wash.

Synthetic fuels are made by extracting hydrogen via renewable energy, and capturing it liquid form with carbon dioxide. Compared to pump fuel, eFuels emit fewer particulates and nitrogen oxide as well. That's because, as Walliser explains, they are composed of eight to 10 ingredients while the dead plants we mine contain 30 to 40, many of which are simply burned and emitted as pollution in the process.

While Porsche is continuing to develop EVs like the Taycan, it says that ICEs will continue to exist in the market for many years to come. Synthetic fuels, along with electrified cars, would be part of a multi-pronged approach to reducing emissions as quickly as possible. Mazda gave a similar statement a couple weeks earlier when it became the first car company to join Europe's eFuel Alliance.

Though they didn't explicitly say so, it would seem that carmakers like Porsche and Mazda have a vested interest in keeping their iconic models on the road as well. Synthetic fuels would allow owners to continue driving them without any modification to the existing engines.

According to Evo, Porsche plans, at least initially, to only use synthetic fuels in motorsports applications and at its Porsche Experience Centers. Porsche will have 130,000 liters (approx. 34,000 gallons) available by 2022 and will conduct its first trials then.

Comments

Popular posts from this blog

C1140 C1140 ACTUATOR RLY

**************************** **************************** C1140 C1140 ACTUATOR RLY Description Activates or deactivates each solenoid valve according to the signals transmitted by the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1140. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Check terminal for deformation, disconnection, looseness, and so on. If any malfunction is found, repair or replace terminal. Nissan-Datsun Truck Armada 2WD V8-5.6L (VK56DE)  C CODE Page 49 4. Reconnect

C1144 C1143, C1144 STEERING ANGLE SENSOR

**************************** **************************** C1144 C1143, C1144 STEERING ANGLE SENSOR Description The steering angle sensor detects the rotation amount, angular velocity and direction of the steering wheel, and transmits the data to the ABS actuator and electric unit (control unit) via CAN communication. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1143. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Disconnect steering angle sensor connector. 4. Check terminal for deformation, disconnection, looseness, and so on.

C1142 C1142 PRESS SENSOR

**************************** **************************** C1142 C1142 PRESS SENSOR Description The front and rear pressure sensors convert the brake fluid pressure to an electric signal and transmit it to the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1142. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. FRONT PRESSURE SENSOR 1.CONNECTOR INSPECTION 1. Turn the ignition switch OFF. 2. Disconnect the front pressure sensor connector and ABS actuator and electric unit (control unit) connector and inspect the terminals for deformation, disconnection, looseness, or damage. Is the inspection result normal? YE