2019 Nissan-Datsun Altima Diagnostic and Repair Information # 10-097 Date: 100823
Exhaust System - Heat Shield Rattles
Classification: EM10-003
Reference: NTB10-097
Date: August 23, 2010
EXHAUST HEAT SHIELD NOISE
APPLIED VEHICLES:
2002 - 2006 Altima (L31) with VQ35DE (V6) engine only
2007 - 2010 Altima Sedan (L32)
2008 - 2010 Altima Coupe (CL32)
2007 - 2010 Altima Hybrid (L32HV)
2004-2008 Maxima (A34)
2009 - 2010 Maxima (A35)
2004- 2009 Quest (V42)
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 469
IF YOU CONFIRM:
A noise is coming from the front exhaust tube heat shield(s) due to rattle.
ACTION:
Secure the heat shield(s) with new band clamps (see PARTS INFORMATION).
^ Refer to REPAIR PROCEDURE.
Do not replace the front exhaust tube for this incident, if it should occur.
IMPORTANT:
The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE
PROCEDURE as it contains information that is essential to successfully completing this repair.
PARTS INFORMATION
CLAIMS INFORMATION
SERVICE PROCEDURE
WARNING:
The exhaust system may be hot. Allow to cool down before inspection/repairs.
NOTE:
Exhaust system parts do not need to be removed for this inspection/repair.
1. Raise the vehicle on a hoist.
2. Inspect the heat shields on the front exhaust tube for the following:
^ Heat shield contact with the exhaust tube.
^ Separated / missing band clamp(s).
^ Weld separation(s).
3. If a heat shield is found contacting the exhaust tube, pry it away to allow a minimum 1 mm (.040 inch) space.
^ Road test the vehicle to verify the repair.
4. If a weld or band clamp is separated, or the band clamp is missing, install new band clamps as needed.
^ For band clamp(s) location, refer to the pictures below that applies to your vehicle.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 470
5. Secure the band clamp with the hex bolt located on the side (or on top, if needed). See Figure 1 above for example.
WARNING:
Do NOT install the hex bolt on the bottom of the exhaust tube.
^ Band clamp hex bolt torque: 4.0 - 5.5 Nm (0.4 - 0.56 Kg-m, 2.9 - 4.0 ft-lb)
6. After securing the band clamp, cut off the clamp's excess at the end.
^ Wrap the end of the band clamp over the hex bolt, and then cut off the excess band clamp within 5 mm (0.2 inches) past the hex bolt (see Figure
2).
WARNING:
Be careful of sharp edges after cutting off the excess band clamp.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 471
7. After band clamp(s) installation, road test the vehicle to verify the repair.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 472
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 473
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 474
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 475
Are you interested in any kinds of hacking services?
ReplyDeleteFeel free to contact TECHNECHHACKS@GMAIL.COM.
For years now we’ve helped so many organizations and companies in hacking services.
TECHNECHHACKS is a team of certified hackers that has their own specialty and they are five star rated hackers.
we deal with the total functioning of sites like,
+ SOCIAL MEDIA (Facebook, Twitter, Instagram, Snapchat, google hangout etc.)
+ CREDIT CARDS INSTALLATION
+ WESTERN UNION TRANSFER
+ MONEY FLIPPING
+ BANK ACCOUNTS
+ IOS/OS
+ CRIMINAL RECORDS
+ SCHOOL GRADES
+ CREDIT SCORES
+ SPOUSES PHONE
+ BTC RECOVERY
+ BTC MINING
Thus bewere of scammers because most persons are been scammed and they ended up getting all solutions to their cyber bullies and attacks by US.
I am Jason williams one of the leading hack agent.
PURPOSE IS TO GET YOUR JOBS DONE AT EXACTLY NEEDED TIME REQUESTED!!!
And our WORK SUCCESS IS 100%!!!
I’m always available for you when you need help.
Contact or write us on:
Technechhacks@gmail.com
Thanks for your time.