Skip to main content

2014 Nissan-Datsun Altima Diagrams. DTC # 12-078 Date: 120919

2014 Nissan-Datsun Altima Diagrams. DTC # 12-078 Date: 120919



Steering - Power Steering Service Information



Classification: ST12-007



Reference: NTB12-078



Date: September 19, 2012



NISSAN; POWER STEERING SYSTEM SERVICE INFORMATION



APPLIED VEHICLES: All 2005 and later Nissan vehicles



equipped with hydraulic rack and pinion steering system



SERVICE INFORMATION



When diagnosing possible power steering leak issues, it is important to follow the Inspection Flow Chart provided in this bulletin.



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 71



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 72



^ See example photos above.



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 73



Inspection Flow Chart



2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 74



Flow Chart A



Fluid Leakage Inspection Preparation



1. Verify the fluid level in the reservoir is within normal cold or hot range, as it applies.



2. Let the engine idle until the fluid temperature is within 50-80锟斤拷C.



3. Turn the steering wheel from full left to full right 30 times.



4. Carefully hold the steering wheel for approximately five (5) seconds in the full (locked) left position, and then the locked right position.



CAUTION:



Do not hold the steering wheel in a locked position for more than 10 seconds. Damage may occur to the power steering pump.



5. Let the engine idle for 10 minutes, and then inspect for leaks.

Labels:

Comments

  1. AnonymousApril 10, 2019 at 12:34 AM

    Are you interested in any kinds of hacking services?
    Feel free to contact TECHNECHHACKS@GMAIL.COM.

    For years now we’ve helped so many organizations and companies in hacking services.
    TECHNECHHACKS is a team of certified hackers that has their own specialty and they are five star rated hackers.


    we deal with the total functioning of sites like,



    + SOCIAL MEDIA (Facebook, Twitter, Instagram, Snapchat, google hangout etc.)

    + CREDIT CARDS INSTALLATION

    + WESTERN UNION TRANSFER

    + MONEY FLIPPING

    + BANK ACCOUNTS

    + IOS/OS

    + CRIMINAL RECORDS

    + SCHOOL GRADES

    + CREDIT SCORES

    + SPOUSES PHONE

    + BTC RECOVERY

    + BTC MINING


    Thus bewere of scammers because most persons are been scammed and they ended up getting all solutions to their cyber bullies and attacks by US.

    I am Jason williams one of the leading hack agent.

    PURPOSE IS TO GET YOUR JOBS DONE AT EXACTLY NEEDED TIME REQUESTED!!!



    And our WORK SUCCESS IS 100%!!!



    I’m always available for you when you need help.

    Contact or write us on:

    Technechhacks@gmail.com

    Thanks for your time.

    ReplyDelete

Post a Comment

Popular posts from this blog

C1140 C1140 ACTUATOR RLY

**************************** **************************** C1140 C1140 ACTUATOR RLY Description Activates or deactivates each solenoid valve according to the signals transmitted by the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1140. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Check terminal for deformation, disconnection, looseness, and so on. If any malfunction is found, repair or replace terminal. Nissan-Datsun Truck Armada 2WD V8-5.6L (VK56DE)  C CODE Page 49 4. Reconnect
Post a Comment
Read more

C1144 C1143, C1144 STEERING ANGLE SENSOR

**************************** **************************** C1144 C1143, C1144 STEERING ANGLE SENSOR Description The steering angle sensor detects the rotation amount, angular velocity and direction of the steering wheel, and transmits the data to the ABS actuator and electric unit (control unit) via CAN communication. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1143. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Disconnect steering angle sensor connector. 4. Check terminal for deformation, disconnection, looseness, and so on.
Post a Comment
Read more

C1142 C1142 PRESS SENSOR

**************************** **************************** C1142 C1142 PRESS SENSOR Description The front and rear pressure sensors convert the brake fluid pressure to an electric signal and transmit it to the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1142. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. FRONT PRESSURE SENSOR 1.CONNECTOR INSPECTION 1. Turn the ignition switch OFF. 2. Disconnect the front pressure sensor connector and ABS actuator and electric unit (control unit) connector and inspect the terminals for deformation, disconnection, looseness, or damage. Is the inspection result normal? YE
Post a Comment
Read more