Tuesday, June 18, 2019
Monday, June 17, 2019
2017 Nissan-Datsun Altima Technical Service Bulletin # 10-153 Date: 101223
2017 Nissan-Datsun Altima Technical Service Bulletin # 10-153 Date: 101223
Brakes - Feel More Sensitive Than Expected
Classification: BR10-013
Reference: NTB10-153
Date: December 23, 2010
2010-2011 ALTIMA AND MAXIMA;
BRAKES FEEL MORE SENSITIVE THAN EXPECTED
APPLIED VEHICLES:2010-2011 Altima Sedan & Coupe (L32 & CL32)
2010-2011 Maxima (A35)
APPLIED VINs: 2010 Altima built after:
1N4(*)L2(***)AC 173905 (Smyrna) or 1N4(*)L2(***)AN 527905 (Canton)
2011 Altima built before:
1N4(*)L2(***)BC 105774 (Smyrna) or 1N4(*)L2(***)BN 407818 (Canton)
2010 Maxima built after: 1N4AA5AP(*)AC 862521
2011 Maxima built before: 1N4AA5AP(*)BC 807780
APPLIED DATE Vehicles built between June 9, 2010 and September 21, 2010
IF YOU CONFIRM
The brakes feel more sensitive than expected with light to moderate brake application,
and/or
Towards the end of bringing the vehicle to a stop (last few feet), the vehicle stops SLIGHTLY quicker than expected.
ACTION
Replace the Brake Booster Assembly
^ Refer to section BR in the appropriate Service Manual for brake booster replacement information.
^ Use the new brake booster listed in the Parts Information.
PARTS INFORMATION
2017 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 223
Sunday, June 16, 2019
2019 Nissan-Datsun Altima Diagnostic and Repair Information # 10-079 Date: 100621
2019 Nissan-Datsun Altima Diagnostic and Repair Information # 10-079 Date: 100621
Electrical - MIL ON/DTC P0128 Due To Remote Start Sys.
Classification: EC10-017
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 252
Reference: NTB10-079
Date: June 21, 2010
MIL "ON" WITH DTC P0128 (THERMOSTAT FUNCTION) STORED
APPLIED VEHICLES: 2002 and later Nissan vehicles
IF YOU CONFIRM
The MIL is "ON" with P0128 (Thermostat Function) stored.
ACTIONS
1. Check to see if an aftermarket remote starter system is installed.
^ Remote starter systems may cause the MIL to illuminate and DTC P0128 to store.
2. If a remote starter system is installed, remove/disconnect it before performing diagnostic procedures on the vehicle.
3. Refer to ASIST and the Electronic Service Manual (ESM) for diagnostic information.
2014 Nissan-Datsun Altima Diagrams. DTC # 11-015B Date: 130201
2014 Nissan-Datsun Altima Diagrams. DTC # 11-015B Date: 130201
Engine - Oil Leakage From The Upper End Of Oil Cooler
Classification:
EM10-002b
Reference:
NTB11-015b
Date:
February 1, 2013
ALTIMA SEDAN AND COUPE, SENTRA, AND ROGUE WITH QR25DE ENGINE; OIL LEAK
This bulletin has been amended in APPLIED VEHICLES, SERVICE PROCEDURE, PARTS INFORMATION, and CLAIMS INFORMATION.
Discard all previous versions of this bulletin.
APPLIED VEHICLES:
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 488
2007 - 2012 Altima Sedan (L32)
2008 - 2013 Altima Coupe (CL32)
2007-2012 Sentra (B16)
2008 - 2013 Rogue (535)
APPLIED ENGINE:
QR25DE (4 cyl)
IF YOU CONFIRM:
Oil is leaking from the upper end of the engine oil cooler (oil cooler). See Figure 1.
ACTION:
Reseal the oil cooler with the parts listed in the PARTS INFORMATION.
^ For repairs refer to SERVICE PROCEDURE.
NOTE:
Do not replace the complete engine oil cooler assembly for this incident if it should occur.
IMPORTANT:
The purpose of ACTION is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE
PROCEDURE as it contains information that is essential to successfully completing this repair.
PARTS INFORMATION
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 489
CLAIMS INFORMATION
SERVICE PROCEDURE
1. Remove the oil cooler from the engine block.
^ Refer to the appropriate section of the Electronic Service Manual (ESM) if needed.
^ Perform repairs in a clean work environment.
2. Remove the four (4) bolts, and then remove the upper half of the oil cooler. See Figure 2.
3. Remove the O-ring gasket, and then thoroughly clean out the gasket area and around it with a suitable cleaner.
^ The dashed line in Figure 3 shows the O-ring gasket area to be cleaned.
^ Make sure no debris or contaminants get into the holes.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 490
^ Also clean underneath the upper half of the oil cooler (no picture shown).
4. Lightly coat the new O-ring gasket (see PARTS INFORMATION) with engine oil, and then put it in place. See Figure 4.
5. Install the upper half of the oil cooler with the bolts.
6. Torque the bolts in two steps: first step at half value, and then the second step at full value (listed below).
^ Bolts torque sequence:
1-2-3-4-5-6-7-8 (see Figure 5).
^ Bolts torque:
4.0 N.m (0.41 kg-m, 35.4 in lb)
7. Install the oil cooler to the engine with a new gasket (see PARTS INFORMATION).
Refer to the appropriate section of the ESM if needed.
Saturday, June 15, 2019
2019 Nissan-Datsun Altima Diagnostic and Repair Information # 11-080 Date: 110824
2019 Nissan-Datsun Altima Diagnostic and Repair Information # 11-080 Date: 110824
Steering/Suspension - Rear Axle Bolt/Torque Change
Classification: RA11-002
Reference: NTB11-080
Date: AUGUST 24, 2011
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 236
ALTIMA AND MAXIMA;
AXLE BOLT AND TORQUE CHANGE
APPLIED VEHICLES:
2002-2012 Altima Coupe, Sedan, and Hybrid (L31, C/L32/HV)
2004-2012 Maxima (A34, A35)
SERVICE INFORMATION
If bolt 56280-JA000 needs to be replaced in the following location:
^ Rear Shock Absorber to Rear Knuckle (see Figure 1 above)
...AND the vehicle is 2002-2012 Altima or 2004-2012 Maxima,
1. Order bolt 56280-JA00A instead of 56280-JA000.
2. Torque bolt 56280-JA00A to 80-100 Nm (8.2-10.2 kg-m, 59-74 ft-lb).
If bolt 56280-JA000 needs to be replaced in the following location:
^ Front Lower Link to Rear Knuckle (see Figure 1)
...AND the vehicle is 2007-2012 Altima or 2009-2012 Maxima,
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 237
1. Order bolt 56280-JA00A instead of 56280-JA000.
2. Torque bolt 56280-JA00A to 83-103 Nm (8.5-10-5 kg-m, 61-76 ft-lb).
2019 Nissan-Datsun Altima Diagnostic and Repair Information # 12-074 Date: 120912
2019 Nissan-Datsun Altima Diagnostic and Repair Information # 12-074 Date: 120912
Computers/Controls - CONSULT III Plus(R) Saved Data List
Classification: EC12-021
Reference: NTB12-074
Date: September 12, 2012
SAVED DATA LIST REPROGRAMMING WITH CONSULT III PLUS
SERVICE INFORMATION
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 84
^ When performing a "Reprogramming" operation with C-III plus, the screen in Figure 1 may display.
^ This screen displays "Saved Data" from previous C-III plus operations.
^ During the initial "Reprogramming Confirmation" set-up, if you get this screen:
1. Select Delete, then
2. Select Other Operation, then
3. Continue with the reprogramming procedure.
NOTE:
If reprogramming does not complete, this screen can display for reprogramming recovery. Do not select Delete if this screen displays
during reprogram recovery.
2014 Nissan-Datsun Altima Diagrams. DTC # 11-073A Date: 130128
2014 Nissan-Datsun Altima Diagrams. DTC # 11-073A Date: 130128
Campaign P1234 - Navigation Software Update For Various Issues
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 522
Reference:
NTB11-073a
Date:
January 28, 2013
VOLUNTARY SERVICE CAMPAIGN CALL WAITING FUNCTION NAVIGATION UPDATE
This bulletin has been amended. Changes have been made throughout to accommodate a new reprogramming disc. Please discard previous versions
of this bulletin.
CAMPAIGN ID #: P1234
APPLIED VEHICLES:
2010-2011 Altima Sedan, Coupe, and Hybrid (L32, CL32, & L32HV)
2010-2011 Maxima (A35)
2010 - 2011 370Z Coupe and Roadster (Z34 and HZ34)
2011 GT-R (R35)
Check Service Comm to confirm campaign eligibility.
INTRODUCTION
On the Applied Vehicles listed above, the navigation, mobile phone, iPod(R), and voice recognition functions may not be working as intended. To
remedy this potential condition, Nissan is conducting this voluntary service campaign to update the navigation software at no charge for parts or
labor. In addition, as part of this navigation software update, a call waiting function will be added to the hands-free phone system.
IDENTIFICATION NUMBER
Nissan has assigned identification number P1234 to this campaign. This number must appear on all communications and documentation of any
nature dealing with this campaign.
DEALER RESPONSIBILITY
Dealers are to repair vehicles falling within range of this campaign that enter the service department. This includes vehicles purchased from private
parties, vehicles presented by transient (tourists) owners, and vehicles in a dealer's inventory.
REPROGRAMMING SOFTWARE DVDs - REQUIRED FOR THIS PROCEDURE
^ Discs 1/3 and 2/3 of the set shown in Figure A are used for 2010 models in this campaign.
^ Do not use disc 3/3.
^ This NEW disc (Figure B) is required for all applied models in this campaign.
^ This disc replaces disc 3/3 above.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 523
^ This disc also replaces disc NTB10-125b / ITB10-066b (disc 1/1) and disc NTB10-068 (disc 1/1) for GT-R.
NOTE:
Numbers on these discs do not match this bulletin's reference number or the campaign ID #.
^ Each dealer was previously mailed the discs listed above, free of charge, from Clarion.
^ Should you require additional discs due to loss or damage, the discs can be ordered, free of charge, by contacting Clarion at the toll free number
1-800-347-8933. Request a new disc using the information printed on the disc.
CLAIMS INFORMATION
Submit a Campaign (CM) line claim using the claims coding:
Service Procedure
For 2011 Models refer to 2011 Models - Installing the Navigation Update
2010 Models - Installing the Navigation Update
IMPORTANT:
Before loading the Reprogram Discs, make sure to Disable Bluetooth(R) function, otherwise the Navigation System may continuously reboot the
next time it is turned on.
NOTE:
This procedure will take about 30 minutes with the ignition ON. Before starting, make sure to attach a battery charger to the vehicle battery set to
a low charge rate (trickle charge).
For 2010 models there are three sections:
A. Disable Bluetooth(R) Function
B. Loading the Program
C. Check Bluetooth(R) Setting
A: Disable Bluetooth(R) Function
1. Set the parking brake.
2. Turn the ignition ON and keep the transmission in Park or Neutral.
3. Make sure there is no disc in the CD/DVD slot (eject any disc that may be in the CD/DVD player).
4. Press the "SETTING" button on the switch panel.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 524
5. Touch "Bluetooth".
6. Make sure Bluetooth is OFF.
^ Touching Bluetooth will change the setting ON > OFF or OFF > ON.
^ Bluetooth is OFF when the ON indicator is "grayed-out".
7. Turn the ignition OFF and wait for 10 seconds.
8. Go to B: Loading the Program.
B: Loading the Program -2010 Models
NOTE:
For 2011 Models, refer to 2011 Models - Installing the Navigation Update.
1. Turn the ignition ON - keep the transmission in Park or Neutral.
^ The navigation start-up screen should display.
NOTE:
If the navigation start-up screen is not displayed; turn the ignition OFF, wait 10 seconds, and then turn the ignition ON again.
2. Wait for more than 1 minute.
3. Press the "INFO" button on the switch panel.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 525
4. Select "Navigation Version" on the display screen.
5. Check "Map Version".
^ If the Map Version is 09-10 MAP No.1 or 09-10 MAP No.1a
a. Continue with Step 6.
^ If the Map Version is any other then above:
a. Insert the new disc NTB12-070 / ITB12-054 (Disc 1/1) into the in-dash CD / DVD player.
The other Discs will not be needed.
b. Skip to step 18.
6. Make sure there is no disc in the CD/DVD slot (eject any disc that may be in the CD/DVD player).
7. Insert disc ITB10-031 / NTB10-068 (Disc 1/3) into the in-dash CD/DVD player.
^ For Altima; open the display by pressing the OPEN/TILT button to access the disc slot. Leave the display open while loading.
IMPORTANT:
Once reprogramming has started:
^ Do not eject a disc while it is loading.
^ Do not change the ignition position until all discs have been loaded.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 526
^ Make sure all 3 discs have been loaded into the CD/DVD player before stopping the procedure.
8. Wait for the program to load (progress bar will display).
9. When the program has finished loading:
^ Disc will automatically eject, and
^ "Program loading is completed" will display.
10. Carefully remove the disc.
11. The navigation system will automatically restart.
12. When the message Please insert Disc 2/3 displays, insert disc ITB10-031 / NTB10-068 (Disc 2/3).
13. Touch "DVD update".
14. Touch "Yes" to begin the map update process.
^ Map update will take about 15 minutes.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 527
15. When "Eject the DVD to let the system reboot is displayed, eject Disc 2/3.
16. The navigation system will automatically restart.
17. When the message Please insert Disc 3/3 displays, insert the new disc NTB12-070 / ITB12-054 (Disc 1/1).
18. With DVD disc NTB12-070 / ITB12-054 (Disc 1/1) inserted, one of the following screens will display:
^ If the screen in Figure 13 is displayed, this disc is not needed.
> Remove/eject the DVD from the CD slot.
> Go to C: Check Bluetooth(R) Setting.
^ If "Now preparing loading shown in Figure 14 is displayed, reprogramming will begin automatically.
> Follow the on-screen Caution during the reprogram.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 528
19. During the first part of the update process, 3 more screens will be displayed along with a percentage of completion (progress) bars:
^ Rewriting boot data. (Figure 15)
^ Rewriting program data (Figure 16)
^ Rewriting language data (Figure 17)
IMPORTANT:
Once the reprogramming has started:
^ Do not eject the DVD while it is loading.
^ Do not change the ignition position until the DVD has been loaded.
20. When the first part of the reprogram has finished loading:
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 529
^ "Program loading is completed will be displayed (Figure 18).
^ The Re-programming Software DVD will automatically eject.
21. Remove the DVD and continue to the second part of the update - step 22.
22. After the DVD is removed, the screen in Figure 19 ("Please insert disc") may ask to reinstall the same Re- programming Software DVD for a
second time.
^ If not (Navigation System restarts), go to step 25.
^ If so, re-insert DVD disc.
> At the top of the screen "Program Loading (2nd)" will be displayed.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 530
23. "Rewriting boot data" (Figure 20) and "Rewriting program data" (Figure 21) will be displayed.
IMPORTANT:
Once reprogramming has started:
^ Do not eject the DVD while it is loading.
^ Do not change the ignition position until the DVD has been loaded.
24. After the reprogram has completed:
^ "Program loading is completed will be displayed (Figure 22).
^ The Re-programming Software DVD will automatically eject.
^ The Navigation system will restart. Proceed to step 25.
After Navigation has restarted:
25. To confirm that the Navigation version has been successfully updated, load DVD disc NTB12-070 / ITB12-054 (Disc 1/1) back into the CD
slot again.
One of the following screens will display:
^ If Figure 23 is displayed, it indicates that the reprogram has been completed.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 531
> If complete, go to step 26.
^ If Figure 24 is displayed, the update did not complete. Allow the update to complete:
> Go back to step 18.
> Follow steps 18 through 25 again.
26. Eject the DVD.
27. Go to C: Check Bluetooth(R) Setting.
C: Check Bluetooth(R) Setting - 2010 Models
1. Press the "Setting button on the switch panel.
2. Touch "Bluetooth".
3. Make sure Bluetooth is set to the customer's setting (as it was before starting the procedure).
^ Touching Bluetooth will change the setting ON > OFF or OFF > ON.
^ Bluetooth is ON when the ON indicator displays in orange.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 532
^ Bluetooth is OFF when the ON indicator is "grayed-out".
4. Turn the ignition OFF. The process is complete.
2011 Models - Installing the Navigation Update
NOTE:
This procedure will take 10 - 15 minutes with the ignition ON. Before starting, make sure to attach a battery charger to the vehicle battery set
to a low charge rate (trickle charge).
1. Turn the ignition ON - keep the transmission in Park or Neutral (parking brake ON).
2. Wait for more than 1 minute.
3. Press the "INFO" button on the switch panel.
4. Make sure there is no disc in the CD/DVD slot (eject any disc that may be in the CD/DVD player).
^ For Altima; open the display by pressing the OPEN/TILT button to access the disc slot. Leave the display open while loading.
5. Load the new disc "NTB12-070/1TB12-054 Re-programming Software DVD into the CD slot of the audio unit.
One of the following screens will display:
^ If the screen in Figure A1 is displayed, this disc is not needed.
> Remove/eject the DVD from the CD slot.
> Procedure is complete.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 533
^ If "Now preparing loading shown in Figure A2 is displayed, reprogramming will begin automatically.
> Follow the on screen Caution during the reprogram.
6. During the first part of the update process, 3 more screens will be displayed along with a percentage of completion (progress) bars:
^ Rewriting boot data. (Figure A3)
^ Rewriting program data (Figure A4)
^ Rewriting language data (Figure A5)
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 534
IMPORTANT:
Once the reprogramming has started:
^ Do not eject the DVD while it is loading.
^ Do not change the ignition position until the DVD has been loaded.
7. When the first part of the program has finished loading:
^ "Program loading is completed will be displayed (Figure A6).
^ The Re-programming Software DVD will automatically eject.
8. Remove the DVD and continue to the second part of the update - step 9.
9. After the DVD is removed, the screen in Figure A7 (Please insert disc) may ask to reinstall the same Re- programming Software DVD for a
second time.
^ If not (Navigation System restarts), go to step 12.
^ If so, re-insert DVD disc.
> At the top of the screen "Program Loading (2nd)" will be displayed.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 535
10. "Rewriting boot data and "Rewriting program data will be displayed once the DVD is reinstalled.
IMPORTANT:
Once reprogramming has started:
^ Do not eject the DVD while it is loading.
^ Do not change the ignition position until the DVD has been loaded.
11. After the reprogram has completed:
^ "Program loading is completed will be display (Figure A10).
^ The Re-programming Software DVD will automatically eject.
^ The Navigation system will restart. Proceed to step 12.
After Navigation has restarted:
12. To confirm that the Navigation version has been successfully updated, load DVD disc NTB12-070 / ITB12-054 back into the CD slot again.
One of the following screens will display:
^ If Figure A11 is displayed, it indicates that the re-program has been completed.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 536
> If complete go to step 13.
^ If Figure A12 is displayed, the update did not complete. Allow the update to complete:
> Go back to step 5.
> Follow steps 5 through 12 again.
13. Eject the DVD.
14. Turn the ignition OFF. Procedure is complete.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 537
Friday, June 14, 2019
2019 Nissan-Datsun Altima Diagnostic and Repair Information # 10-017 Date: 100201
2019 Nissan-Datsun Altima Diagnostic and Repair Information # 10-017 Date: 100201
Instruments - Fuel Gauge Issues/DTC's P0461/P0462/P0463
Classification:
EL09-030
Reference:
NTB10-017
Date:
February 1, 2010
ALTIMA AND MAXIMA; FUEL GAUGE ISSUES
AND/OR DTC P04611 P0462 / P0463
APPLIED VEHICLES:
2007-2010 Altima (L32)
2008-2010 Altima Coupe (CL32)
2008-2010 Altima Hybrid (L32HV)
2009-2010 Maxima (A35)
IF YOU CONFIRM:
The fuel gauge is erratic, inaccurate, or inoperative
And / Or
The MIL is "ON with DIG P0461, P0462, or P0463 stored in Self-Diagnosis.
ACTION:
Replace the fuel level sensor unit.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 394
^ Refer to the SERVICE PROCEDURE section of this bulletin for repair procedure.
^ Use the parts listed in the PARTS INFORMATION section in this bulletin.
NOTE:
Do not replace the entire fuel pump module assembly for this incident, if it should occur.
IMPORTANT:
The purpose of ACTION is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE
PROCEDURE as it contains information that is essential to successfully completing this repair.
PARTS INFORMATION
CLAIMS INFORMATION
Submit a Primary Failed Part (PP) line claim using the claims coding shown.
NOTE:
Version 1 fuel pump module assembly fits on earlier model year Altima models. Version 2 fits on later Altima and all Maxima models.
SERVICE PROCEDURE
1. Remove the fuel pump module assembly (module).
^ Refer to the appropriate section of the Electronic Service Manual (ESM), if needed.
NOTE:
Perform repairs in a clean work environment.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 395
2. Determine which version module you are working on (see Version 1 and 2).
3. Remove the 3 wire terminals with red, white, and double-wire black wires from under the top of the module as shown in Figure 1.
NOTE:
The white wire may appear yellowish in color.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 396
^ Press the tab in and gently pull the wire off its terminal (see Figure 2)
4. Remove the plastic tie strap that holds the wires to the fuel supply hose (supply hose) as shown in Figure 3.
CAUTION:
Be careful not to damage the supply hose or wiring when removing the tie strap.
5. Remove the fuel tank temperature sensor (temp sensor) from its retention feature (see Figure 4).
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 397
6. Version 1: Remove the temp sensor wires from the retention feature (see Figure 5).
7. Version 2 only: Remove the temp sensor wires from both retention features (see Figure 6).
8. Version 1 only: Remove all wires from the retention feature on the module (see Figure 7).
NOTE:
This retention feature is not reused.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 398
9. Version 1 only: Remove the black plastic retainer (retainer) as shown in Figure 8.
^ Pry on the clip ends using a pocket screwdriver or suitable tool, one side at a time (see Figure 8).
10. Remove the level sensor from the module (see Figure 9).
Push the tab inward, and then push the level sensor up, and then pull it away from the module.
11. Install the new level sensor onto the module (no picture shown).
Perform Step 10 in reverse, making sure its tab locks into place.
12. Version 1 only: Reinstall the retainer by snapping it into place (see Figure 10).
^ Make sure the level sensor's wires are not pinched under the retainer.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 399
13. Install the temp sensor into its retention feature (see Figure 11).
14. Version 1 only: Install the temp sensors wiring into the retention feature as shown in Figure 12.
^ Route the temp sensor's wires to the right of the level sensor.
^ Make sure the wiring is clear of float arm movement.
^ Make sure the wiring is within 0.5 inches (13 mm) from the side of the module.
15. Version 2 only: Secure the level sensors wires into the retention features (see Figure 13).
^ Make sure the wiring is within 0.5 inches (13 mm) from the side of the module.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 400
16. Route the wires on the inside of the supply hose (see Figure 14).
17. Secure the wires to the supply hose with a tie strap as shown in Figure 14.
CAUTION:
Be careful not to damage the supply hose or wires when installing the tie strap.
^ Step 17 applies to both module versions.
NOTE:
Tie straps are considered a shop supply.
18. Install the wires to the correct terminals (see Figure 15 below).
^ Make sure the wires are routed correctly as shown in Figure 15.
--> Red and white wires are routed in front of the blue wire.
--> The double black wire is in between the blue and single black wires.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 401
^ Make sure the tabs are securely locked.
2019 Nissan-Datsun Altima Diagnostic and Repair Information # 04-049H Date: 110413
2019 Nissan-Datsun Altima Diagnostic and Repair Information # 04-049H Date: 110413
Electrical - Trailer Light Wiring Info.
Classification: EL03-043H
Reference: NTB04-049H
Date: April 13, 2011
TRAILER LIGHT WIRING
This bulletin has been amended. The Applied Vehicles have been updated. Please discard previous versions of this is bulletin.
APPLIED VEHICLES
SERVICE INFORMATION
NOTE:
This bulletin provides information to be shared with all affected customers.
^ This TSB contains the appropriate hookup points for connecting a trailer light wiring harness to the towing vehicle's electrical system.
^ The wiring diagrams contained in this bulletin are for Nissan vehicles that have trailer towing capability (see the owners manual) but do not have a
Genuine Nissan accessory towing kit (with wiring) available.
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 318
2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 319
^ When splicing into the vehicle electrical system, a power-type module/converter must be used to provide power for all trailer lighting. A
power-type module/converter uses the vehicle battery as a direct power source for all trailer lights while using the vehicle taillight, stoplight, and
turn signal circuits only as a signal source. (See the illustration above.) The module/converter must draw no more than 5 milliamps from the
vehicle turn signal circuits and no more than 15 milliamps from the stop and tail light circuits.
CAUTION:
Using a module/converter that exceeds these power requirements listed above may negatively affect the performance and function of the vehicle's
electrical system.
See a professional trailer dealer or trailer rental agency for installation of the proper equipment.
Customers who inquire about towing should be reminded of the following:
^ Always check for correct operation of the turn signals, stoplights, and taillights every time a trailer is hitched up for towing.
^ The towing capacity for 350Z (Coupe Only), Altima, Maxima, and Sentra is 1,000 lbs.
For more information, refer customers to the Owner's Manual as well as the Nissan Towing Guide, available online at NissanUSA.com.