Skip to main content

Ford Recalls 154,000 Vehicles, Once Again Over Takata Airbags

The Takata airbag saga is seeing yet another chapter added to its history. A new recall has been issued in connection to the faulty component, this time because Ford has lost track of some old airbags installed during repairs over the years. Recall that the faulty Takata airbags can explode and send shrapnel into the faces and upper bodies of vehicle occupants.

Since the scandal erupted several years ago, some 67 million airbags have been recalled across the industry, affecting 19 manufacturers. In total, 27 people have died and around 400 have been injured.

Ford is now recalling more than 154,000 vehicles across North America for testing. In fact, two recalls are taking place. The largest one involves some 153,000 vehicles being recalled because Ford has lost track of 45 old airbags that are believed to have been installed on old Ranger pickup trucks. Ford says the airbags were never removed from its parts inventory and might have been used to repair damaged vehicles.

The affected models belong to the 2004-2006 model-years.

A much-smaller second recall involves around 1,100 vehicles that may also have been equipped with obsolete Takata cushions during accident repairs. Here, several models are affected; they include? the Ranger pickup (2004-2011), Mustang (2005-2014), Ford GT (2006), Fusion (2008-2012) and Edge SUV (2007-2010), as well as the Lincoln MKZ (2010-2012) and MKX (2007-2010).

Ford says it is not aware of any accidents or injuries related to this particular issue. The company states that it is checking the vehicles at the request of the National Highway Traffic Safety Administration (NHTSA), the U.S. equivalent of Transport Canada.

Dealers will inspect the front seat airbags and replace them if necessary. Owners will be notified beginning the week of March 8.

Discover Shopicar! All new makes and models and all current promotions.

Comments

Popular posts from this blog

C1140 C1140 ACTUATOR RLY

**************************** **************************** C1140 C1140 ACTUATOR RLY Description Activates or deactivates each solenoid valve according to the signals transmitted by the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1140. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Check terminal for deformation, disconnection, looseness, and so on. If any malfunction is found, repair or replace terminal. Nissan-Datsun Truck Armada 2WD V8-5.6L (VK56DE)  C CODE Page 49 4. Reconnect

C1144 C1143, C1144 STEERING ANGLE SENSOR

**************************** **************************** C1144 C1143, C1144 STEERING ANGLE SENSOR Description The steering angle sensor detects the rotation amount, angular velocity and direction of the steering wheel, and transmits the data to the ABS actuator and electric unit (control unit) via CAN communication. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1143. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. 1.CONNECTOR INSPECTION 1. Turn ignition switch OFF. 2. Disconnect ABS actuator and electric unit (control unit) connector. 3. Disconnect steering angle sensor connector. 4. Check terminal for deformation, disconnection, looseness, and so on.

C1142 C1142 PRESS SENSOR

**************************** **************************** C1142 C1142 PRESS SENSOR Description The front and rear pressure sensors convert the brake fluid pressure to an electric signal and transmit it to the ABS actuator and electric unit (control unit). DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAGNOSIS RESULTS Check the self-diagnosis results. Is above displayed on the self-diagnosis display? YES - Proceed to diagnosis procedure. See: C1142. NO - Inspection End Diagnosis Procedure Regarding Wiring Diagram information, See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Diagrams/Electrical Diagrams. FRONT PRESSURE SENSOR 1.CONNECTOR INSPECTION 1. Turn the ignition switch OFF. 2. Disconnect the front pressure sensor connector and ABS actuator and electric unit (control unit) connector and inspect the terminals for deformation, disconnection, looseness, or damage. Is the inspection result normal? YE