NISSAN

Monday, March 4, 2019

INSANE DRIVING Subaru Impreza WRX STi GC8 on Track! - LOUD Turbo Sound f...

Mercedes Benz Diagnostic and Repair Information ,Wiring Diagrams. DTC. TSB. Types: TSB, DTC, Wiring Diagrams, OEM Procedures. Trusted by more than 400,000 technicians. OEM accurate fix for faster repairs. Repair Procedures and Labor Times. Factory Auto Repair info. Request A Demo Today. Factory-Correct Diagrams. Factory Part Numbers. Maintenance Schedules. Repair Procedures. Labor Times. Types: TSB, DTC.car insurance, auto insurance, auto, car, vehicle, insurance, quote, quotes, online, insurance，auto, autos, car, cars, vehicle, vehicles, used car, pre-owned car, pre-owned vehicle, used auto, used vehicle, rental，auto racing news, car racing news

INSANE DRIVING Subaru Impreza WRX STi GC8 on Track! - LOUD Turbo Sound f...

or go to http://www.safercar.gov.2019 Nissan-Datsun Altima Diagnostic and Repair Information # 10-061A Date: 100629

2017 Nissan-Datsun Altima Technical Service Bulletin # 10-064 Date: 100513

Recall PC046 - Front Side Member Welds

Reference: NTB10-064

Date: May 13, 2010

VOLUNTARY SAFETY RECALL CAMPAIGN 2010 ALTIMA SEDAN FRONT SIDE MEMBER WELD

CAMPAIGN ID #: PC046

NHTSA #: 10V-193

APPLIED VEHICLES: 2010 Altima Sedan (L32) - Coupe and Hybrid not included

Check Service COMM to confirm campaign eligibility.

INTRODUCTION

Nissan is conducting a Voluntary Safety Recall Campaign on certain select model year 2010 Nissan Altima Sedans. A small number of vehicles may

have welds on the front side member that are out of specification. To address this, Nissan will inspect, and if necessary, repair the front side member

welds at no charge for parts or labor.

NUMBER OF VEHICLES POTENTIALLY AFFECTED

Approximately 48 vehicles are affected by this campaign.

IDENTIFICATION NUMBER

Nissan has assigned identification number PC046 to this campaign. This number must appear on all communications and documentation of any

nature dealing with this campaign.

DEALER RESPONSIBILITY

It is the dealer's responsibility to check Service Comm for the campaign status on each vehicle falling within the range of this voluntary safety recall

which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners

and vehicles in a dealer's inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be

corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies

only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed.

2017 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 420

VEHICLE HANDLING FLOWCHART

Use Service Comm (campaign ID PC046) to confirm the vehicle you're working on is affected by this campaign.

Email with the following information:

Email subject line: PC046 - 2010 Altima Sedan Front Side Member Weld

Service manager name:

Dealer contact phone number:

Dealer Code:

Dealer name:

Customer name:

VIN:

2017 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 421

CLAIMS INFORMATION

2017 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 422

Sunday, March 3, 2019

2014 Nissan-Datsun Altima Diagrams. DTC # 09-086 Date: 091006

Recall PC012 - Front Strut Insulator Cracking

Reference: NTB09-086

Date: October 6, 2009

VOLUNTARY SAFETY RECALL CAMPAIGN

2009 - 2010 ALTIMA AND MAXIMA FRONT STRUT MOUNTING INSULATOR

CAMPAIGN ID #: PC012

NHTSA #: 09V-358

APPLIED VEHICLES:

2009 - 2010 Maxima (A35)

2009 - 2010 Altima (L32, CL32 & L32HV) Sedan, Coupe, & Hybrid

Check Service COMM to confirm campaign eligibility.

INTRODUCTION

Some specific model year 2009 2010 Altima and Maxima vehicles may have been built with front strut mounting insulators that were not

manufactured to specification. The strut mounting insulators on these specific vehicles may crack. To remedy this potential condition Nissan is

conducting this voluntary safety recall campaign to replace the strut mounting insulators with new ones at no charge for parts or labor.

IDENTIFICATION NUMBER

Nissan has assigned identification number PC012 to this campaign. This number must appear on all communications and documentation of any

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 345

nature dealing with this campaign.

DEALER RESPONSIBILITY

It is the dealer's responsibility to check Service Comm for the campaign status on each vehicle falling within the range of this voluntary safety recall

which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners

and vehicles in a dealer's inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be

corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies

only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed.

PARTS INFORMATION

CLAIMS INFORMATION

Service Procedure

NOTE:

^ Replace both front strut insulators.

^ The photos in this procedure are for the driver side, the passenger side is similar.

1. If equipped; remove the strut covers (see Figure 1).

^ Driver side has 2 clips.

^ Passenger side has one clip.

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 346

2. Remove the front wheels.

3. Remove the brake hose clip and brake hose from the strut bracket (see Figure 3).

4. Remove the ABS sensor harness from the strut brackets 2 spots (see Figure 3).

5. Remove the sway bar end link nut (see Figure 3).

IMPORTANT:

^ Hold the link with a wrench on the opposite side to prevent damage to the end link joint.

^ Keep the nut; it will be reused during reassembly.

6. Loosen - do not remove - both strut to knuckle nuts (see Figure 3).

IMPORTANT:

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 347

Do not fully remove nuts at this time.

7. Remove the 3 upper strut mounting bolts.

^ Keep the bolts; they will be reused during reassembly.

8. Remove the strut to knuckle nuts & bolts.

^ Discard the nuts; new nuts will be used during reassembly.

9. Remove the strut assembly from the vehicle.

10. Securely "bench mount" the strut assembly.

11. Use a suitable spring compressor to compress the strut spring.

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 348

WARNING:

Make sure the spring compressor is securely connected / hooked to the spring.

12. Remove the center nut at the top of the strut.

^ Discard the nut, a new nut will be used for reassembly.

13. Remove the strut mounting insulator.

14. Install the new strut mounting insulator.

^ The new insulator has 2 white dots in the center (see Figure 8).

^ Make sure the insulator is positioned correctly, as shown in Figure 8.

15. Install the new center nut at the top of the strut.

^ Torque the nut to 73.2 N锟絤 (7.46 kg-m, 54 ft-lb).

16. Gradually release the spring compressor tension and remove the spring compressor.

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 349

17. Make sure the lower end of the spring coil is correctly and firmly seated in the spring seat as shown in Figure 9.

18. Install the strut assembly into the vehicle.

^ Use new nuts on the strut to knuckle bolts.

^ Install loosely - do not tighten - at this time.

19. Install the 3 top strut mounting bolts.

^ Torque bolts to 35.3 N锟絤 (3.6 kg-m, 26 ft-lb).

^ Apply a small amount of multi-purpose grease to the threads on the strut center shaft.

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 350

20. Torque the strut to knuckle nuts (see Figure 12).

^ Torque bolts to 139.6 N锟絤 (14.2 kg-m, 103 ft-lb).

21. Install the sway bar end link nut (see Figure 12).

^ Torque nut to 78.6 N锟絤 (8.0 kg-m, 58 ft-lb).

IMPORTANT:

Hold the link with a wrench on the opposite side to prevent damage to the end link joint.

22. Install the ABS sensor harness into the strut brackets 2 spots (see Figure 12).

23. Install the brake hose and clip into strut bracket (see Figure 12).

24. Install the front wheels.

^ Tighten lug nuts in a 3 step diagonal pattern,

^ Final torque 113 N锟絤 (12 kg-m, 83 ft-lb).

25. If equipped, reinstall the strut covers.

26. Use an alignment rack to check / set the front toe.

^ Make sure the alignment rack has been recently calibrated.

Toe-in specification:

Minimum: 0

Nominal: 1 mm

Maximum: 2 mm

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 351

2017 Nissan-Datsun Altima Technical Service Bulletin # 10-120A Date: 111007

Interior - Front Seats Bind/Won't Move Fore/Aft

Classification: BT10-011A

Reference: NTB10-120A

Date: October 7, 2011

2007-2012 ALTIMA;

MANUAL DRIVER OR PASSENGER SEAT BINDS, OR WILL NOT MOVE, FORWARD AND BACKWARD

This bulletin has been amended to include additional model years to the The Applied Vehicles section. No other changes have been made.

APPLIED VEHICLE:

2007-2012 Altima Sedan (L32); with manual seats only

2007-2011 Altima Hybrid (L32HV); with manual seats only

IF YOU CONFIRM:

The driver and / or front passenger manual seat binds, or will not move, when adjusting forward or backward.

ACTION:

Repair the seat with the Service Kit.

^ Use the kit listed in the PARTS INFORMATION section below.

^ For repair procedure, go to SERVICE PROCEDURE.

NOTE:

2017 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 197

Do not replace the seat assembly for this incident, if it should occur.

IMPORTANT:

The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE

PROCEDURE as it contains information that is essential to successfully completing this repair.

PARTS INFORMATION

CLAIMS INFORMATION

SERVICE PROCEDURE

2017 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 198

Service Kit

Disclaimer

Service Procedure

Remove Seat Tracks

IMPORTANT

1. Write down all radio station presets.

2. Remove the incident seat from the vehicle.

^ For seat removal procedure, refer to BODY INTERIOR, SEAT of the appropriate Electronic Service Manual (ESM), if needed.

NOTE:

> Before seat removal, turn off the ignition switch, disconnect both battery cables (negative cable first), and then wait at least three (3) minutes.

2017 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 199

> When removing and installing, use suitable covering to protect the vehicle from damage.

> Do not use the slide release handle (for fore / aft adjustment) to lift the seat.

> Perform seat repairs in a clean work area, such as a work bench with suitable covering.

> The outer seat finishers extend to the rear. Be careful when laying the seat on its seatback.

CAUTION:

The front passenger seat is equipped with an Occupant Detection System sensor and control module. Do not disassemble the front passenger seat

cushion assembly or remove the trim as this will affect the Occupant Detection System's calibration.

NOTE:

Step 3 is for the driver seat only. For passenger seat, refer below to Step 4.

3. For lift type seats only: remove the seat lifter handle (see Figure 1).

a. To access the screws, pry off the lift lever finisher with a suitable tool (see Figure 1).

b. Remove the screws (see Figure 2).

2017 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 200

4. Remove the clips holding the seatback's lower fabric (see Figure 3).

5. Lift up on the seatback's lower fabric, and then remove the screw located at the rear of the outer finisher (see Figure 4).

CAUTION:

For passenger seats only, do not disassemble the seat cushion fabric, it's trim, or its attachments (see CAUTION above for more detail).

NOTE:

Removal of passenger seat outer finisher similar.

6. Remove the seat outer finisher.

2017 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 201

^ See Figure 5 for screw and clips location.

^ Passenger seat outer finisher similar.

7. Lay the seat on its seatback.

8. Remove the slide release handle return spring (return spring). See Figure 6.

2017 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 202

^ While holding the return spring on the one end, pry the other end of the return spring out of its positioning hole (see Figure 7).

9. Remove the nuts securing the outer seat slide track, and then remove the outer track and slide release handle (release handle). See Figure 8.

NOTE:

The passenger seat may have only three (3) nuts for each track. This is normal.

10. Remove the nuts securing the inner track, and then remove the inner track (see Figure 9).

11. Install the new inner track with new nuts (see Figure 9).

^ Nuts torque sequence: 1-2-3-4

^ Nuts torque: 30 Nm (3.0 kg-m, 22 ft-lb)

2017 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 203

NOTE:

Replacement seat tracks have four studs. They are to replace both 3- and 4-stud seat tracks.

12. Install the release handle and return spring to the inner track.

^ See Figure 10 for return spring position.

13. Install the outer track to the release handle and seat (no picture shown).

^ Install the nuts finger tight at this time.

14. Adjust the tracks to measure 430 mm (16-15/16 inches) between each locator pin, and then slightly tighten the nut of the outer track closest to the

locator pin (see Figure 11 above).

15. Adjust the tracks to measure 430 mm (16-15/16 inches) between the center of each track hole, and then torque the outer track nuts (see Figure

11).

2017 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 204

^ Nuts torque sequence: 1-2-3-4 (see Figure 12)

^ Nuts torque: 30 Nm (3.0 kg-m, 22 ft-lb)

NOTE:

Replacement seat tracks have four studs. They are to replace both 3- and 4-stud seat tracks.

16. Re-check both measurements.

^ If measurements do not match the values given above, loosen the outer track nuts, and then repeat Step 14 and 15.

17. Install the outer seat finisher. Refer to Figure 5.

18. Position the the seatback's rear fabric under both seat finisher ends, and then secure the clips (see Figure 13).

19. Install the seat in the vehicle.

^ Install and torque the seat-to-body bolts in the following order:

Front inner

Front outer

Rear inner

Rear outer

^ Seat bolts torque: 49 Nm (5.0 kg-m, 36 ft lb)

^ For seat installation procedure, refer to BODY INTERIOR, SEAT of the appropriate ESM, if needed.

^ Do not use the release handle to lift the seat.

^ If the tracks are not aligned, lift up on the release handle, and then adjust as needed.

2017 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 205

20. Verify the seat operates normally; make sure both tracks lock into place after fore / aft adjustment.

21. Reconnect both battery cables, negative cable last.

22. Reset / initialize all applied systems i.e., radio, clock, sunroof, etc.

^ Program customer's radio presets from step 1 back into audio unit.

Saturday, March 2, 2019

2014 Nissan-Datsun Altima Diagrams. DTC # 12-035 Date: 120410

Engine Controls - ECM Replacement Procedures With Consult 3+

Classification: EC12-008

Reference: NTB12-035

Date: April 10, 2012

ECM REPLACEMENT PROCEDURES WITH CONSULT III PLUS

APPLIED VEHICLES: All 2004 and later Does not apply to LEAF/EV

IF YOU CONFIRM:

The Electronic Control Module (ECM) needs to be replaced on a 2004 MY and later vehicle.

ACTIONS:

After installing ECM:

^ Perform ECM Re-communicating Function (if supported).

^ Perform the "ACCELERATOR PEDAL & THROTTLE VALVE CLOSED POSITION LEARNING" procedure (see step 3).

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 123

^ Perform the "IDLE AIR VOL LEARNING" procedure (when applicable) using CONSULT-III plus (CIII plus). (See step 4)

^ For 2005 and later vehicles, enter the vehicle VIN into the new ECM (see step 5).

^ Check for any new updates for the new ECM you're installing (see step 6).

CAUTION:

^ Failure to perform all the work steps in the specified order can cause poor engine running, MIL ON, or vehicle emission test rejection.

^ Some vehicles may have Additional Services When Replacing the ECM not covered within this bulletin. Refer to the model specific ESM and

CIII plus "Maintanance" tab for for any additional model specific services.

IMPORTANT:

The purpose of "ACTIONS" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service

Procedure as it contains information that is essential to successfully completing this repair.

CLAIMS INFORMATION

Service Procedure

ECM Re-communication Function

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 124

1. Re-communicate the ECM with the BCM or Intelligent key.

^ Performing the following procedure can automatically perform a re-communication of a new ECM with a BCM or Intelligent Key unit (not all

models supported) so that the NATS keys do not need to be registered.

^ This Function will only work when the ECM has been replaced with a new one which has never been energized onboard.

^ If this function is not supported all of the keys may need to be individually registered.

a. Install new ECM.

b. Use a registered key (*) to turn ignition switch to "ON". * To perform this step, use a key that is registered to the original ECM that was

replaced.

c. Maintain ignition switch in the "ON" position for at least 5 seconds.

d. Turn ignition switch to "OFF".

e. Start engine.

> If engine can be started continue to step 3.

2. If engine will NOT start, after you perform the ECM Re-Communication Function, all ignition keys will need to be individually registered,

including spare keys with CIII plus and then proceed with step 3.

^ Refer to the Immobilizer tab on the CIII plus home page to register keys.

NOTE:

^ When registering new Key IDs or replacing the ECM with other than brand new unit, refer to the Immobilizer tab on the CIII plus home

page.

^ If multiple keys are attached to the key holder, separate them before work.

^ Distinguish keys with unregistered key ID from those with registered ID.

Accelerator Pedal & Throttle Valve Closed Position Learning

3. Perform the Accelerator Pedal & Throttle Valve Closed Position Learning as follows:

a. Make sure the accelerator pedal is fully released.

b. Turn the ignition switch "ON" for 2 seconds.

c. Turn the ignition switch "OFF" for 10 seconds.

d. Turn the ignition switch "ON" for 2 seconds, then

e. Turn the ignition switch "OFF" again for 10 seconds (see Figure 1).

f. Proceed with step 4 (below).

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 125

Perform Idle Air Volume Learning (IAVL)

NOTE:

Make sure all electrical loads are turned OFF, including A/C, defroster, radio, lights, etc. while performing the following procedures. Also,

make sure the engine cooling fans are NOT operating during the following procedures.

4. Perform the Idle Air Volume Learning procedure as follows:

a. Connect CIII plus to the vehicle.

b. Warm up engine and transmission to operating temperature.

NOTE:

Vehicle may have to be driven to warm transmission enough to allow IAVL to complete.

c. In the CIII plus "Maintenance mode", select "IDLE AIR VOL LEARN" and then "Confirm". See Figure 2.

d. Press "Next" then "Start" on the IDLE AIR VOL LEARN screen. See Figure 3.

^ START cannot be selected until all operating conditions have been met.

^ The IAVL procedure will take several minutes to complete.

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 126

^ CIII plus will display "EXECUTING" in the "Current status" box while the IAVL EXECUTING procedure is in process. See Figure 4.

^ CIII plus will display "COMPLETE" in the Current status box when the IAVL procedure is finished. See Figure 5.

f. Once the IAVL procedure is finished, proceed with step 5 (below).

For 2005 and Later MY Vehicles ONLY: Enter VIN into New Service Replacement ECM

5. Enter the VIN into the new service replacement ECM as follows:

a. Select "Diagnosis (One System)", "ENGINE", "Work support" and "VIN REGISTRATION". See Figure 6.

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 127

b. Enter the vehicle VIN in both the VIN (1st TIME) and VIN (2nd TIME) boxes, then select Start. See Figure 7.

c. Once completed (COMAND SUCCEDED; See Figure 8) turn the ignition off for 10 seconds, then back on and check for any DTCs.

d. Select "READ VIN" and confirm that the VIN is correct.

^ If VIN does not display it can also be checked through the "RE/programming, Configuration" tab.

Check for ECM Updates

6. Check and confirm that ECM is updated to most recent part number and perform reprogram procedure if not most current.

> Select and use the reprogramming option that does not have the message "Caution! Use ONLY with NTBXX-XXX".

^ If you are not familiar with checking for an ECM update or with the reprogramming procedure, refer to the C-III plus "ECM Reprogramming

general procedure".

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 128

^If an update is not listed and a blank screen is displayed (see figure 9), a reprogram is not available for the ECM.

2014 Nissan-Datsun Altima Diagrams. DTC # 12-075 Date: 120914

Interior - Rattle Noise From Front Door Panels

Classification: BT12-008

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 75

Reference: NTB12-075

Date: September 14, 2012

2009-2012 ALTIMA SEDAN;

RATTLE NOISE FROM FRONT DOOR PANEL(S)

APPLIED VEHICLES: 2009-2012 Altima Sedan (L32)

APPLIED VINS & DATES:

2009 vehicles built after: 1N4(*)L21(**)9C 165197 // Jan. 21, 2009

1N4(*)L21(**)9N 477825 // Jan. 21, 2009

2010-2011 vehicles: All

2012 vehicles beginning with 1N4(*)L2A(**)CC: All

2012 vehicles built before: 1N4(*)L2A(**)CN 558951 // April 17, 2012

IF YOU CONFIRM

A rattle noise coming from the speaker/pocket area of the front door panel(s) can be heard while audio is playing.

ACTION

1. Remove both front door panels (finishers).

2. Confirm the position of two (2) foam blocks and adjust as needed.

3. Confirm the position of the speaker grill foam strip and adjust as needed.

4. Clean the rim of the door panel.

5. Cut an EPT foam seal (listed in Parts Information) in half, and apply one (1) half to each door panel.

6. Confirm the front speaker screws are properly tightened.

NOTE:

This incident, if it should occur, may sound like a speaker-related issue. Perform the Service Procedure in this bulletin before performing

other repairs (if needed), such as replacing a speaker.

IMPORTANT:

The purpose of "ACTION" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire

Service Procedure as it contains information that is essential to successfully completing this repair.

PARTS INFORMATION

CLAIMS INFORMATION

SERVICE PROCEDURE

NOTE:

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 76

^ Perform the following steps for both front door panels (driver and passenger side).

^ Images shown in this procedure are of the driver side panel. The process for the passenger side is a mirror image.

1. Remove the front door panel (finisher).

^ Refer to the INT section of the applicable Electronic Service Manual (ESM) for front door panel removal information.

2. Lay the door panel face-down on a clean, flat work surface.

NOTE:

Cover the work surface with a clean cloth fender cover (or other suitable protector) to prevent staining or damage to the door panel face.

3. Check the location of the two (2) foam blocks shown in Figure 1, above.

If the foam blocks are:

^ in the locations shown in Figure 1, or

^ missing

....proceed to step 4.

NOTE:

Do not replace missing foam blocks.

If a foam block(s) is:

^ out of place

....reattach the foam block(s) to the proper location(s), then proceed to step 4.

NOTE:

Use Figure 1 as a reference when reattaching the foam block(s).

4. Check the position of the foam strip applied to the door speaker opening.

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 77

^ If the foam strip is centered on the rib and the ends meet (Figure 2), proceed to step 5.

^ If the foam strip is not centered on the rib and/or the ends do not meet (Figure 3), reattach the foam strip to the proper location (Figure 2).

Then, proceed to step 5.

NOTE:

If needed, use a general trim adhesive to reattach the foam strip.

5. As indicated in Figure 4, use isopropyl alcohol to clean the rim of the door panel.

6. Cut an EPT foam seal (listed in Parts Information) in half.

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 78

NOTE:

You will use one half of the foam seal on each door.

7. Apply one (1) half of the foam seal to the rim of the door panel.

a. Starting at the edge of the lower foam block, press the EPT foam seal down onto the rim.

NOTE:

If the lower foam block is missing, start the foam seal in the center of the "dip" in rim. See Figure 6.

b. Continue pressing down the foam seal, following the contour of the door panel.

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 79

7. Confirm the three (3) front speaker screws are properly tightened.

8. Reinstall the door panel in reverse order of removal.

^ Refer to the INT section of the applicable ESM for door panel installation information.

9. Recheck for the rattle noise. If the rattle noise is still present, refer to ASIST and the applicable ESM for further diagnostic information.

2019 Nissan-Datsun Altima Diagnostic and Repair Information # 09-131A Date: 110815

Vehicle - Certification Label/VIN Plate Replacement

Classification: BT09-020A

Reference: NTB09-131A

Date: August 15, 2011

CERTIFICATION LABEL AND VIN PLATE REPLACEMENT

This bulletin has been amended. Please discard previous versions of this bulletin.

APPLIED VEHICLES: All Nissan

SERVICE INFORMATION

Because of collision damage or other vehicle repair, a replacement "Certification Label or "VIN Plate/Label" may be needed.

NOTE:

Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label.

These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for

such replacements.

^ The "VIN Plate/Label" (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see

Figure 1).

^ The "Certification Label" (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).

CERTIFICATION LABEL REPLACEMENT CRITERIA

NOTE:

See "Replacement VIN plate/label" below.

A replacement Certification Label may be requested ONLY if the vehicle is in a collision and:

^ The Certification Label is damaged, or

^ The Certification Label is attached to a part that will be replaced during the repair.

REQUESTING A REPLACEMENT CERTIFICATION LABEL

1. Take a photo of the original Certification Label in its original location on the vehicle B pillar.

^ A photo of the original Certification Label before it is removed must accompany the application; or processing will be significantly delayed or

rejected.

^ If the vehicle is produced outside of the U.S. and a legible Certification Label photo is not provided, the request will be rejected.

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 246

^ If the vehicle is produced in the U.S. and is greater than 60 days old and a legible Certification Label photo is not provided, the request will be

rejected.

2. Completely fill out a copy of the APPLICATION FOR REPLACEMENT CERTIFICATION LABEL shown above.

3. Remove the original Certification Label from the vehicle and attach in the designated area on the application form.

^ Processing will be significantly delayed or rejected if the original Certification Label is not available (or a legible photo).

4. Staple the photo of the original Certification Label (in its original location) to the application form.

5. Mail (DO NOT FAX) the completed application with the photo of the label to your Regional Office: Attention: Replacement Certification and

VIN Plate Request.

NOTE:

Your dealer "Non Vehicle Account" will be billed $25.00 for each replacement label.

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 247

NOTE

VIN PLATE/LABEL REPLACEMENT CRITERIA

APPLICATION FOR REPLACEMENT VIN PLATE/LABEL

NOTE

Refer to "Replacement Certification Label"

A replacement VIN plate/Label may be requested ONLY if:

^ The vehicle is in a collision and the VIN plate/label is damaged.

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 248

^ The vehicle was recovered after being stolen and the VIN plate/label is damaged but still available.

REQUESTING A REPLACEMENT VIN PLATE / LABEL

1. Completely fill out a copy of the APPLICATION FOR REPLACEMENT VIN PLATE / LABEL.

2. Remove the original VIN plate/label from the vehicle and attach in the designated area on the application form.

^ The original VIN plate/label MUST accompany the application.

^ For a VIN label that will destroy itself when removed:

> A photo of original instrument panel VIN Label must accompany the application

> A photo of the Certification label (on the B-pillar) clearly showing the VIN must also accompany the application.

^ Stolen VIN plate/label:

> If a VIN Plate/Label is stolen, contact the appropriate State Police or State Department of Motor Vehicles (DMV). In most cases, the State

DMV will issue a unique VIN so the original VIN can be included on stolen vehicle listings. If this is the case, a replacement VIN

plate/label is NOT available from Nissan. However, the original VIN, not the state issued VIN, must be used on all warranty claims.

3. Mail (DO NOT FAX) the completed application with the photo of the label to your Regional Office: Attention: Replacement Certification and

VIN Plate Request.

NOTE:

^ Your dealer "Non Vehicle Account" will be billed $25.00 for each replacement VIN plate/label.

^ All replacement VIN plates/labels are subject to approval by the Technical Compliance Department. If you have any specific questions,

contact your Owner Relations Manager (ORM).

Friday, March 1, 2019

2017 Nissan-Datsun Altima Technical Service Bulletin # 10-100 Date: 100823

Interior - Front Power Seats Won't Move Forward

Classification: BT10-015

Reference: NTB10-100

Date: August 23, 2010

MAXIMA AND ALTIMA COUPE; DRIVER OR PASSENGER POWER SEAT WILL NOT MOVE FORWARD

APPLIED VEHICLE:

2009 - 2010 Maxima (A35)

2008 - 2010 Altima Coupe (CL32)

IF YOU CONFIRM:

The driver or front passenger power seat does not move forward from the full rearward position.

ACTIONS:

Synchronize the seat tracks.

^ Refer to SERVICE PROCEDURE of this bulletin for repair procedure.

^ Use parts contained in the Front Seat Slide Kit listed in the PARTS INFORMATION section of this bulletin.

If the seatback does not recline, this bulletin does not apply.

^ Refer to the appropriate section of the Electronic Service Manual (ESM) for further diagnosis.

NOTE:

Do not replace the seat bottom or seat lower assembly for this incident, if it should occur.

IMPORTANT:

2017 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 447

The purpose of ACTIONS (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the SERVICE

PROCEDURE (as it applies) as it contains information that is essential to successfully completing this repair.

PARTS INFORMATION

CLAIMS INFORMATION

SERVICE PROCEDURE

1. Operate the power seatback.

IMPORTANT

^ If seatback fore / aft recline operation works normally, go to Step 2.

^ If seatback fore / aft recline operation does not work at all, this bulletin does not apply.

> Refer to the ESM for further diagnosis.

2. Start the engine, let it idle.

^ This will make the alternator increase the voltage during seat operation.

2017 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 448

3. Write down radio station presets.

4. Attempt to move the incident seat forward by repeatedly pressing the seat switch.

^ If the seat moves forward, go to Step 5 below.

^ If the seat does not move forward by the 10th attempt of pressing the seat switch, go to "Seat Removal When Seat Will Not Move Forward"

below.

5. Remove the seat from the vehicle.

^ Once the seat is removed, go to "Seat Track Synchronization".

^ For seat removal procedure, refer to BODY INTERIOR, SEAT of the appropriate ESM.

NOTE:

> Before seat removal, turn off the ignition switch, disconnect both battery cables (negative cable first), and then wait at least three (3) minutes.

> When removing and installing, use suitable covering to protect the vehicle from damage.

> Do not grab onto the thigh extension release lever (Maxima driver seat only) to lift the seat.

> Perform seat repairs in a clean work area, such as a work bench with suitable covering.

> The outer seat finishers extend to the rear. Be careful when laying the seat on its seatback.

WARNING:

Do not tap, hit, or impact the seat in any way during the entire process of this repair.

CAUTION:

The front passenger seat is equipped with an Occupant Detection System sensor and control module. Do not disassemble the front passenger seat

cushion assembly or remove the trim as this will affect the Occupant Detection System's calibration.

Seat Removal When Seat Will Not Move Forward

1. Turn off the ignition, and then disconnect both battery cables, negative cable first.

WARNING:

Wait at least three (3) minutes before continuing repairs as stated in the ESM seat removal procedure.

2017 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 449

2. Locate the two rivets securing the flex cable protector cover (cover) shown in Figure 1. For easier viewing only: Figure 1 shows the seat already

removed.

3. Cover the seat tracks below the rivets (to keep drilled shavings from getting in the tracks).

4. Drill out these rivets with a 3/16 inch drill bit.

CAUTION:

When drilling, do not let the drill bit come in contact with the seat harness. Protect the harness as necessary.

^ Use a shop vacuum to remove all drilled shavings on the carpet and seat track.

^ Do not use shop air pressure to remove any shavings.

2017 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 450

5. Flip up the cover, and then remove the harness and connector clips by pinching and then pushing them out (see Figure 2).

^ Remove the cover.

6. For driver seat: Disconnect the Inboard flex cable (I/B cable, closest to center console) at the drive motor by pulling it out.

^ For passenger seat: Disconnect the Outboard (0/B) cable (closest to passenger door) at the drive motor by pulling it out.

^ See Figure 3 for components location.

7. Make sure the outer (black) portion of the cable is fully seated in its silver gear box (gear box).

8. Make sure the inner cable is fully seated in the gear box by pushing and twisting it at the same time.

2017 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 451

9. Attach a suitable drill to the end of the inner cable (see Figure 4).

^ For this step, make sure to use the existing cable.

10. Break loose the internals of the gear box by spinning the inner cable counter clockwise.

11. Spin the inner cable clockwise at slow drill speed until the seat is near its original position.

12. Reconnect the cable to the drive motor.

13. Reconnect the battery cables, negative cable last.

14. Move the seat fore / aft as necessary to access the seat mounting bolts.

15. Go back to "Seat Removal When Seat Will not Move Forward". Observe and perform all of Step 5 (seat removal).

Seat Track Synchronization

1. Place the seat in a clean work area i.e., on fender covers on top of a work bench.

2. For driver seat: Adjust the I/B track 2.0 mm (5/64 inch) further back than the 0/B track.

^ For passenger seat: Adjust the 0/B track 2.0 mm further back than the I/B track.

2017 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 452

^ The part of the track being adjusted bolts to the floor.

^ Seat tracks adjustment is performed by spinning the inner cables.

^ Figure 5 shows a typical seat and track position when taking measurements.

^ In Figure 5a, the top view is the same for the passenger seat, but the I/B and 0/B track positions are switched.

NOTE:

When measuring, the gear boxes and tracks can be positioned anywhere, as long as they are adjusted to the difference in measurement stated above.

CAUTION:

2017 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 453

If the cables are not being replaced, adjust the tracks by spinning the inner cable with your fingers. Do not use a drill.

3. Replace both cables only if the procedure Seat Removal When Seat Will Not Move Forward was performed.

NOTE:

Replacement cables come with the slide kit (see PARTS INFORMATION).

a. Insert one end of each cable into each gear box.

> Make sure the outer (black) portion of the cable is fully inserted.

b. Twist and push on the inner cable. Figure 7 and 8 show fully seated and not fully seated positions.

4. While gently bending it in the middle, insert the other end of each cable into the drive motor (no picture shown).

> Rotate and wiggle the cable as needed to get it fully seated into the motor. Figure 9 and 10 show correct and incorrect installation.

5. If the tracks have moved out of synchronization after cables installation, perform "SEAT TRACK SYNCHRONIZATION" Step 2 as needed.

^ When making adjustments, use one of the old cables.

^ Do not bend the new cable excessively when removing it.

Reinstall Flex Cable Protector Cover

1. Once synchronization is complete, if the cover was removed, install it with the two supplied rivets.

^ Either cover, the existing one or the new one from the kit, can be used.

2017 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 454

2. Install the right side rivet first (as viewed from the front of the seat), and then the left side rivet. See Figure 11.

3. Secure the harness and connector clips to the cover. See Figure 11.

Reinstall Seat

1. Reinstall the seat in the vehicle. Refer to BODY INTERIOR, SEAT of the appropriate ESM.

^ Seat mounting bolts torque sequence:

Front inner

Front outer

Rear inner

Rear outer

^ Seat mounting bolts torque: 49 Nm (5.0 kg-m, 36 ft lb)

2. Reconnect the battery cables, negative cable last.

3. Adjust the seat to its full rearward position.

a. Press the seat switch for rearward movement 30 more times.

b. Press the seat switch for forward movement, making sure the seat moves forward when pressed the first time.

4. Verify proper power seat operation:

^ Operate the seatback fore / aft (complete travel) a few times.

^ Operate the seat lift up / down a few times (complete travel, if so equipped).

5. Reset/initialize all applied systems i.e., radio, power windows, clock, sunroof, etc.

2014 Nissan-Datsun Altima Diagrams. DTC # 10-078 Date: 100621

Engine Controls - ECM Programming Interruption Recovery

Classification: EC10-015

Reference: NTB10-078

Date: June 21, 2010

REPROGRAM INTERRUPTION RECOVERY PROCEDURE

SERVICE INFORMATION

A complete step-by-step General Procedure for CONSULT-III (C-III) ECM Reprogram Interruption Recovery is now available by attachment in this

bulletin.

While performing ECM (Engine Control Module) reprogramming, the reprogramming may stop (become interrupted) before it is 100% complete.

One of two messages may appear:

^ The VI probe is disconnected on USB, please check the connection of the probe.

^ Reprogramming fail, "Error code 0".

In many cases, reprogramming recovery is possible and the ECM may not need to be replaced if the complete ECM part number has been registered

into the ECM before reprogramming stopped.

NOTE:

ECM is referred to as ECU in C-III.

The ECM Reprogram Interruption Recovery General Procedure applies to Technical Service Bulletins that include ECM reprogramming published

in April 2010 and later.

IMPORTANT: BEFORE STARTING REPROGRAMMING

^ Connect a battery charger to the vehicle battery.

^ Be sure to turn OFF all vehicle electrical loads.

^ For ECM reprogramming, the C-III MUST be connected to the VI using the USB cable.

^ Be sure to connect the AC Adapter.

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 253

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 254

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 255

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 256

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 257

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 258

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 259

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 260

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 261

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 262

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 263

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 264

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 265

2019 Nissan-Datsun Altima L4-2.5L (QR25DE) Page 266